PTRA094808NF

8

Rev. 05.2, 2022-01-04

© 2022 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc.

The information in this document is subject to change without notice.

4600 Silicon Drive | Durham, NC 27703 | Tel: +1.919.313.5300

Package Outline Specifications – Package PG-HBSOF-6-2

G1

PG-HBSOF-6-2_prelim_08-30-2016

2ÊXÊ10

�

25.40

22.7ʱÊ0.15

2ÊXÊ

7�

0.5

2ÊXÊ1.00

G2

D2

2ÊXÊ1.52

2ÊXÊ1.19

2ÊXÊ8.92

2ÊXÊ6.29

2ÊXÊ1.61

25.40

4ÊXÊ7.83

4.46

6

1

1.17

3.00

Y

1.57ʱÊ0.10

D1

VIEWÊY

2ÊXÊ0.5

21.3

23.26

24.4

0.05

2

G2

G1

D2

D1

V

V

V

V

S

PG-HBSOF-6-2_prelim_08-30-2016

Diagram Notes–unless otherwise specified:

1. Mold/dam bar/metal protusion of 0.30 mm max per side not included.

2. Metal protrusion are connected to source and shall not exceed 0.10 mm max.

3. Fillets and radii: all radii are 0.3 mm max.

4. Interpret dimensions and tolerances per ISO 8015.

5. Dimensions are mm.

6. Does not include mold/dam bar/metal protusion.

7. Exposed metal surface is tin-plated, may not be covered by mold compound.

8. All tolerances ± 0.1 mm unless specified otherwise.

9. All metal surfaces are tin-plated, except area of cut.

10. Lead thickness: 0.25 mm.

11. Pins: D1, D2 – drain; G1, G2 – gate; S – source, V – V

DD.

Diagram Notes—unless otherwise specified:

1. Mold/dam bar/metal protrusion of 0.30 mm max per side not included.

2. Metal protrusion are connected to source and shall not exceed 0.10 mm max.

3. Fillets and radii: all radii are 0.3 mm max.

4. Interpret dimensions and tolerances per ISO 8015.

5. Dimensions are mm.

6. Does not include mold/dam bar and metal protrusion.

7. Exposed metal surface is tin-plated, may not be covered by mold compound.

8. All tolerances ± 0.1 mm unless specified otherwise.

9. All metal surfaces are tin-plated, except area of cut.

10. Lead thickness: 0.25 mm.

11. Pins: D1, D2 = drain; G1, G2 = gate; S = sourec, V1, V2 = no DC bias, NC or

connect to GRD

V2

V1

PG-HBSOF-6-2_2017-01-11

2 X 10°

2 X

7°

Diagram Notes—unless otherwise specified:

1. Mold/dam bar/metal protrusion of 0.30 mm max per side not included.

2. Metal protrusions are connected to source and shall not exceed 0.10 mm max.

3. Fillets and radii: all radii are 0.3 mm max.

4. Interpret dimensions and tolerances per ISO 8015.

5. Dimensions are mm.

6. Does not include mold/dam bar and metal protrusion.

7. Exposed metal surface is tin-plated, may not be covered by mold compound.

8. All tolerances ± 0.1 mm unless specified otherwise.

9. All metal surfaces are tin-plated, except area of cut.

10. Lead thickness: 0.25 mm.

11. Pins: D1, D2 = drain; G1, G2 = gate; S = source, V1, V2 = no DC bias, NC or

connect to GRD

V2

V1

PG-HBSOF-6-2_02.1_01-17-2017

2x 10°

2x 7°

2x 1.00

2x 1.19

2x 8.92

2x 6.29

2x 1.61

2x 1.52

1.57

11. Pins: D1, D2 = drain; G1, G2 = gate; S = source; V1 = drain video

decoupling, no DC Bias, V2 = NC or connected to GRD