HUMIREL HPC077VC

HTF3000LF

July 2006

5

HTF3000LF SMD

Dimensions in millimeters

BOTTOM VIEW

Dim

A

B

C

D

E

F

Weight : 2.1g

Recommended SMD FootPrint

Ordering information: HPP808H033

Soldering information

Hand soldering :

Temperature of the soldering iron must be kept under 350°C.

Duration of the soldering operation less than 3 seconds

Automatic soldering :

Standard Tin-Lead or Lead Free Wave Soldering Process

Recommended Reflow Profile as per Humirel specification

The information in this sheet has been carefully reviewed and is believed to be accurate; however, no responsability is assumed for inaccuracies. Furthermore, this information does not convey to the

purchaser of such devices any license under the patent rights to the manufacturer. Humirel may make changes at the specified product performance and design, under. Humirel makes no warranty,

representation or guarantee regarding the suitability of its product for any particular purpose, nor does Humirel assume any liability arising out of the application or use of any product or circuit and

specifically disclaims any and all liability, including without limitation consequential or incidental damages. « Typical » parameters can and do vary in different applications. All operating parameters,

including « Typical » must be validated for each customer applications by customer’s technical experts. Humirel does not convey any license under its patent rights nor the rights of others. Humirel products

are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other application intended to support or sustain life, or for any application in which

the failure of the Humirel product could create a situation where personal injury or death may occur. Should buyer purchase or use Humirel products for any such unintended or unauthorized application,

Buyer shall indemnify and hold Humirel and its officers, employees, subsidaries, affiliates and distributors harmless against all claims, costs, damages and expenses, and reasonable attorney fees arising

out of, directly or indirectly, any claim of presonal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Humirel was negligent regarding the design or

manufacture of the part.Humirel is a registred trade mark of Humirel.

Min

17.9 12.0

9.15

14.37 4.88

0.8

Max 18.9 13.0 10.15 14.77 5.28

2.8

J

H

L

K

Dim

5.6

7.2

8.4

0.54

Min

6.6

8.2

9.8

0.74

Max

3.18 mm

2.31 mm

F

T

5.08 mm

-

+

15.28 mm

19.90 mm

1.27 mm

14.00 mm

3.82 mm