MPC8323ECVRADDC datasheet(37/80 Pages) FREESCALE

37 / 80 page

MPC8323E PowerQUICC™ II Pro Integrated Communications Processor Family Hardware Specifications, Rev. 0

Freescale Semiconductor

GPIO

Figure 28 provides the AC test load for the timers.

Figure 28. Timers AC Test Load

14 GPIO

This section describes the DC and AC electrical specifications for the GPIO of the MPC8323E.

14.1

GPIO DC Electrical Characteristics

Table 11 provides the DC electrical characteristics for the MPC8323E GPIO.

14.2

GPIO AC Timing Specifications

Table 41 provides the GPIO input and output AC timing specifications.

Table 40. GPIO DC Electrical Characteristics

Characteristic

Symbol

Condition

Min

Max

Unit

Notes

Output high voltage

VOH

IOH = –6.0 mA

2.4

—

Output low voltage

VOL

IOL = 6.0 mA

—

0.5

Output low voltage

VOL

IOL = 3.2 mA

—

0.4

Input high voltage

VIH

—2.0

OVDD +0.3

Input low voltage

VIL

—

–0.3

0.8

Input current

IIN

0 V

≤ VIN ≤ OVDD

—

±5

μA

Note:

1. This specification applies when operating from 3.3-V supply.

Table 41. GPIO Input AC Timing Specifications1

Characteristic

Symbol2

Min

Unit

GPIO inputs—minimum pulse width

tPIWID

Notes:

1. Input specifications are measured from the 50% level of the signal to the 50% level of the rising edge of CLKIN. Timings are

measured at the pin.

2. GPIO inputs and outputs are asynchronous to any visible clock. GPIO outputs should be synchronized before use by any

external synchronous logic. GPIO inputs are required to be valid for at least tPIWID ns to ensure proper operation.

Output

Z0 = 50 Ω

OVDD/2

RL = 50 Ω

MPC8323ECVRADDC Datasheet(PDF) 37 Page - Freescale Semiconductor, Inc

MPC8323ECVRADDC Datasheet(HTML) 37 Page - Freescale Semiconductor, Inc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80

Datasheet Download

Link URL