7

7 - 62

For price, delivery, and to place orders, please contact Hittite Microwave Corporation:

20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373

Order On-line at www.hittite.com

v00.0607

HMC648LP6 / 648LP6E

GaAs MMIC 6-BIT DIGITAL

PHASE SHIFTER, 2.9 - 3.9 GHz

Evaluation PCB

The circuit board used in the final application should

use RF circuit design techniques. Signal lines

should have 50 ohm impedance while the package

ground leads and exposed paddle should be con-

nected directly to the ground plane similar to that

shown. A sufficient number of via holes should be

used to connect the top and bottom ground planes.

The evaluation board should be mounted to an

appropriate heat sink. The evaluation circuit board

shown is available from Hittite upon request.

Item

Description

J1 - J2

PCB Mount SMA RF Connector

J3 - J4

Molex Header 2mm

U1

HMC648LP6(E) 6-Bit Digital Phase Shifter

117718 Eval Board

[1] Reference this number when ordering complete evaluation PCB

[2] Circuit Board Material: Rogers 4350

[3] Please refer to part’s pin description and functional diagram for

pin out assignments on evaluation board.