NXR-ILM08C-ECT

4

Applicable Support Software

The following table shows support software that can be used in the system configured with the NXR-series EtherCAT IO-Link Master Unit. The

Support Software used depends on the scope of the applicable system. For versions of support software, refer to Version Information on page 13.

*1. From the controller from another company, make settings through message communications. Or use a commercially-available IO-Link USB

master to make settings from the CX-ConfiguratorFDT. For the commercially available IO-Link USB master, the following models are

recommended.

Destination to which IO-Link Master Unit is

connected

Applicable Support Software

Controller

EtherCAT master

Creating the user

program

Setting the PDO

mapping

Setting up

IO-Link Master

Unit

Setting and

monitoring IO-Link

devices

NJ/NX-series CPU

Unit or NY-series

Industrial PC

Built-in EtherCAT ports on

NJ/NX-series CPU Unit or

NY-series Industrial PC

Sysmac Studio

Sysmac Studio

Sysmac Studio

CX-ConfiguratorFDT

Controller from

another company

EtherCAT master from another

company

Software from

another company

Software from

another company

Software from

another company

*1

Model

Manufacturer

USB-2-IOL-0002

TURCK

IO-Link-Master02-USB

Pepperl+Fuchs