Getting Started

KTMPC5744DBUG Rev. 1.0 2/2015

4

Freescale Semiconductor, Inc.

2

Getting Started

2.1

Kit Contents/Packing List

The KITMPC5744DBEVM contents include:

• Assembled and tested evaluation board/module in anti-static bag.

• The board preloaded with demo software

• Warranty card

2.2

Jump Start

Freescale’s analog product development boards help to easily evaluate Freescale products. These tools support analog mixed signal and

power solutions including monolithic ICs using proven high-volume SMARTMOS mixed signal technology, and system-in-package devices

utilizing power, SMARTMOS and MCU dies. Freescale products enable longer battery life, smaller form factor, component count reduction,

ease of design, lower system cost and improved performance in powering state of the art systems.

•Go to www.freescale.com/analogtools

• Locate your kit

• Review your Tool Summary Page

• Look for

• Download documents, software and other information

Once the files are downloaded, review the user guide in the bundle. The user guide includes setup instructions, BOM and schematics.

Jump start bundles are available on each tool summary page with the most relevant and current information. The information includes

everything needed for design.

2.3

Required Equipment and Software

KITMPC5744DBEVM is an extensible board for the KIT33908MBEVBE and cannot operate separately. Equipment list is considered for

operation with the KIT33908MBEVBE uniquely. We can distinguish two modes of operation with this platform.

Recommended equipment for software development:

• Power supply 12 V/3.0 A

• USB A-B cable

• Debugger for the MPC5744P MCU

• USB-enabled PC

Recommended equipment for hardware development (validation of Analog functionality etc.):

• Power supply: typically 12 V/3.0 A

• USB A-B cable

• USB-enabled PC

Recommended software:

• MC33907_8 Graphical User Interface (GUI)



(http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=KIT33907AEEVB&fpsp=1&tab=Design_Tools_ Tab)

• Greenhills IDE for Qorivva MCU family installed (http://www.ghs.com/products/MULTI_IDE.html)

2.4

System Requirements

The kit requires the following to function properly with the software:

• x86 or compatible processor

• Windows 7, 32-bit, Service Pack 1

• .NET Framework 4.0 or higher

Jump Start Your Design