16LF1613 datasheet(22/396 Pages) MICROCHIP

22 / 396 page

 2014-2016 Microchip Technology Inc.

DS40001737B-page 22

PIC12(L)F1612/16(L)F1613

3.3.2

SPECIAL FUNCTION REGISTER

The Special Function Registers are registers used by

the application to control the desired operation of

peripheral functions in the device. The Special Function

Registers occupy the 20 bytes after the core registers of

every data memory bank (addresses x0Ch/x8Ch

through x1Fh/x9Fh). The registers associated with the

operation of the peripherals are described in the appro-

priate peripheral chapter of this data sheet.

3.3.3

GENERAL PURPOSE RAM

There are up to 80 bytes of GPR in each data memory

bank. The Special Function Registers occupy the 20

bytes after the core registers of every data memory

bank (addresses x0Ch/x8Ch through x1Fh/x9Fh).

3.3.3.1

Linear Access to GPR

The general purpose RAM can be accessed in a non-

banked method via the FSRs. This can simplify access

to large memory structures. See Section 3.6.2 “Linear

Data Memory”

for more information.

3.3.4

COMMON RAM

There are 16 bytes of common RAM accessible from all

banks.

3.3.5

DEVICE MEMORY MAPS

The memory maps are shown in Table 3-2 through

Table 3-7.

FIGURE 3-2:

BANKED MEMORY

PARTITIONING

Memory Region

7-bit Bank Offset

00h

0Bh

0Ch

1Fh

20h

6Fh

7Fh

70h

Core Registers

(12 bytes)

Special Function Registers

(20 bytes maximum)

General Purpose RAM

(80 bytes maximum)

Common RAM

(16 bytes)

Rev. 10-000041A

7/30/2013

16LF1613 Datasheet(PDF) 22 Page - Microchip Technology

16LF1613 Datasheet(HTML) 22 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL