www.elma.com

7|7

06|20

©

Copyright 2018 by Elma Electronic AG, CH-8620 Wetzikon. Subject to technical modifications, all data supplied without liability.

SELECTOR SWITCH

07R

DATASHEET

Please contact our sales team for more details.

China: +86 21 5866 5908

France: +33 388 56 72 50

Germany: +49 7231 97 34 0

Israel: +972 3 930 50 25

Singapore: +65 6479 8552

Switzerland: +41 44 933 41 11

United Kingdom: +44 1234 838 822

United States: +1 510 656 3400

Specifications

MECHANICAL DATA

Detent angle | positions:

36° detent angle | 5 positions

Rotary limitation | end stop:

Configurable

Switching torque:

2.2 or 3.5 Ncm (±25 % in new condition)

Rotational life:

> 10'000 cycles (tested at room temperature)

Rotational stop strength:

> 45 Ncm

Fastening torque of nut (front panel mounting):

M6 x 0.75: < 100 Ncm

ELECTRICAL DATA

Electrical connection:

Pins 0.4 x 0.7 mm

Switching voltage:

< 42 VDC (resistive load)

Switching current:

< 2'000 mA (resistive load)

Contact resistance:

< 50 mΩ (in new condition)

Switching function:

1 pole, 2 to 5 positions

Switching mode:

Shorting or non-shorting

Dielectric strength:

500 VDC during 60 s (pin-to-pin, pin-to-housing)

Insulation resistance:

> 1 GΩ at 500 VDC (pin-to-pin, pin-to-housing, in new condition)

MATERIALS

Shaft:

Stainless steel 1.4305

Bushing | housing:

Zinc die casting, fiberglass reinforced high performance plastic

Contact surface:

Cu alloy (Au plated)

Soldering leads:

Cu alloy (tin plated)

Hex nut:

Brass

Slotted nut:

Brass or stainless steel

O-rings:

NBR (nitrile rubber), 70 shore A

ENVIRONMENTAL DATA

Operating temperature:

-40 to +85 °C (IEC 60068-2-14)

Storage temperature:

-40 to +85 °C (IEC 60068-2-14)

IP sealing against front panel:

IP60 without sealing

IP68 with shaft and front panel sealing (2 bar, 1 h)

Vibration:

10 GRMS at 10 to 2'000 Hz

Flammability:

UL94-HB

SOLDERING CONDITIONS

Hand soldering:

< 280 °C during 2 s

Wave soldering:

< 280 °C during 2 s