STA680D datasheet(24/48 Pages) STMICROELECTRONICS

Part #	STA680D

Description	Automotive HD Radio™ baseband receiver

PDF	48 Pages

Scroll/Zoom	100%

Manufacturer	STMICROELECTRONICS [STMicroelectronics]

Direct Link	http://www.st.com

Logo

24 / 48 page

Operation and general remarks

STA680

24/48

DS5877 Rev 13

Figure 6 shows a simplified version of the internal clock generation unit.

Figure 6. Clock generation unit

Clock generation unit

Some remarks on the clock input pin follow:



OSC_IN is always a 1.8 V input pin;



CLK_IN, BB1_BCK are 3.3 V;



When the clock is fed through the CLK_IN pin, the OSC_IN pin must be connected to

ground (and vice versa);



The BB1_BCK pin is the bit clock of the digital interface to the baseband Tuner. When

this pin is selected as input for the reference clock, the selected clock frequency must

be chosen compatibly with the Primary baseband Interface settings (see Section 5.2):

–

10.4 MHz = 16 * 650 kHz

 BBI set to 650 Ksample/s

–

10.8 MHz = 16 * 675 kHz

 BBI set to 675 Ksample/s;



When the device reference clock comes from BB1_BCK it is suggested to connect the

OSC_IN to ground and to tie the CLK_IN pin to its high value (3.3 V).

STA680D Datasheet(PDF) 24 Page - STMicroelectronics