INA191 datasheet(22/42 Pages) TI2

22 / 42 page

8 Application and Implementation

Note

Information in the following applications sections is not part of the TI component specification,

and TI does not warrant its accuracy or completeness. TI’s customers are responsible for

determining suitability of components for their purposes, as well as validating and testing their design

implementation to confirm system functionality.

8.1 Application Information

The INAx191 amplifies the voltage developed across a current-sensing resistor as current flows through the

resistor to the load or ground.

8.1.1 Basic Connections

Figure 8-1 shows the basic connections of the INAx191. Connect the input pins (IN+ and IN–) as closely as

possible to the shunt resistor to minimize any resistance in series with the shunt resistor. The ENABLE pin must

be controlled externally or connected to VS if not used.

ADC

ENABLE

OUT

GND

IN+

IN±

LOAD

Microcontroller

Supply Voltage

1.7 V to 5.5 V

100 pA

(typical)

100 pA

(typical)

0.1 …F

RSENSE

INA191

INA2191 (½)

Bus Voltage

up to 40 V

REF

(1)

(1) REF pin only available on INA2191

Figure 8-1. Basic Connections for the INAx191

A power-supply bypass capacitor of at least 0.1 µF is required for proper operation. Applications with noisy

or high-impedance power supplies may require additional decoupling capacitors to reject power-supply noise.

Connect bypass capacitors close to the device pins.

INA191, INA2191

SLYS020C – FEBRUARY 2019 – REVISED AUGUST 2021

www.ti.com

Submit Document Feedback

Product Folder Links: INA191 INA2191

INA191 Datasheet(PDF) 22 Page - Texas Instruments

INA191 Datasheet(HTML) 22 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42

Datasheet Download

Link URL