Device overview

SN260-2SK/RAIS, STZB-SK/RAIS

2/6

1

Device overview

The REva ZigBee starter kit adds ZigBee wireless connectivity to a proven platform for ST7,

STM32, STR7 and STR9 microcontroller application development. For RF connectivity,

each kit includes a preprogrammed SNRCM-260 module and the EmberZnet wireless

protocol stack, which interfaces with the developer's microcontroller application via Ember's

EZSP serial interface.

Note:

Starter kit only contains software for STR7 and STR9 devices. STR7 and STR9 daughter

boards must be purchased separately. Please contact ST sales office for more information

Even though preprogrammed with the necessary firmware, the SNRCM-260 modules can

be also updated using the SPI bootloader application through the STM32 microcontroller.

(The SN260 must be loaded with a stack version supporting the bootloader: EmberZNet

3.0.1 or more recent.)

The SNRCM-260 modules also include an SIF/PTI connector that allows reprogramming

using the Ember InSight USB Link and EM2USB command line interface (included in the

SN260-2SK/RAIS) or an Ember InSight Adapter (not included).

For developing, refining and debugging the STM32 or ST7 microcontroller application,

developers benefit from the proven Raisonance REva evaluation platform and toolset, which

includes:

●

Embedded RLink for in-circuit debugging and programming of STM32 and ST7

applications with USB connection to the host PC.

●

REva motherboard universal evaluation board for ST microcontroller applications. It is

powered from the RLink's USB connection to the host PC.

●

REva daughter boards - interchangeable boards featuring different target

microcontrollers, make it easy to evaluate and develop applications for a range of

MCUs from a single evaluation platform.

●

Ride7 and RIDE toolsets - Raisonance's integrated development environments drive

the RLink and offers seamless control of all software development tools (compiler,

assembler, linker, debugger, etc.) from an intuitive graphical interface. Fully integrates

control of the GNU C/C++ compiler for ARM and Cosmic C Compiler for ST7 (RIDE

toolset).

Note:

For ARM application development, the starter kit contains a 32K code size limited version of

Ride7 (used for ARM microcontrollers). The previous RIDE toolset is used only for the ST7

microcontroller. The starter kit also does not support Flash debugging.