| Electronic Components Datasheet Search |
|
HD404019RFS Datasheet(PDF) 21 Page - Renesas Technology Corp |
|
|
|||||||||||||||||||||||||||||
HD404019RFS Datasheet(HTML) 21 Page - Renesas Technology Corp |
|
21 / 65 page ![]() HD404019R Series 19 Serial Interface The serial interface is used to transmit/receive 8-bit data serially. It consists of the serial data register, the serial mode register, the octal counter, and the multiplexer as illustrated in figure 9. Pin R4 0/SCK and the transmit clock signal are controlled by the serial mode register. The contents of the serial data register can be written into or read out by software. The data in the serial data register can be shifted synchronously with the transmit clock signal. The STS instruction initiates serial interface operations and resets the octal counter to $0. The counter starts to count at the falling edge of the transmit clock ( SCK) signal and increments by one at the rising edge of SCK. When the octal counter is reset to $0 after eight transmit clock signals, or a transmit/receive operation is discontinued, the serial interrupt request flag will be set. System clock Prescaler (11 bits) Serial MPX ÷ 2 MPX SMR (4 bits) Serial mode register R40/SCK port SCK OC (3 bits) Octal counter IFS SROF Serial interface interrupt request flag Internal bus line (S1) SR (8 bits) Serial data register 4 2 3 44 SCK SCK 4 PMR (4 bits) Port mode register R41/SI port SI SO R42/SO port 44 Internal bus line (S2) Internal bus-line (S2) Figure 9 Serial Interface Block Diagram Serial Mode Register (SMR: $005): The 4-bit write-only serial mode register controls the R4 0/SCK pin, prescaler divide ratio, and transmit clock source as shown in table 7. The write signal to the serial mode register controls the operating state of the serial interface. The write signal to the serial mode register stops the serial data register and octal counter from accepting the transmit clock, and it also resets the octal counter to $0 simultaneously. Therefore, when the serial interface is in the transfer state, the write signal causes the serial mode register to cease the data transmit and to set the serial interrupt request flag. |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |