STV9432TA

13/24

9 - SOFTWARE RESET REGISTER

This bit will be automatically reset by the device.

Software Reset will put all Write registers at their default power-on value, and reset all internal logic

10 - ON-SCREEN DISPLAY

The STV9432TA on-screen display is able to dis-

play any line of characters (character strip) any-

where in the screen.

Character strings are programmed by the MCU in

the internal ROM font. Character strips may be

adjacent or separated by vertical spaces (Spacing

strips).

Consequently, one display page is made of a list

of Character strips and Spacing strips.

A Top Margin and a Left Margin are programmable

in dedicated registers.

10.1 - RAM PROGRAMMING

10.1.1 - Two kinds of Data:

Strip Descriptors and Character Codes

An OSD screen is made of a number of Character

and Spacing strips.

Two groups of Data make one OSD screen:

- a Strip Descriptors list,

- Text strings - one per Character strip.

Each Strip is associated with a 2 bytes Strip

Descriptor.

There are two Strip Descriptors:

- The Character Strip Descriptors containing the

Text string Ram address of the Character Strip,

- The Spacing Strip Descriptors which specify the

vertical space height.

OSD screen, is made of 9 strips.

In RAM, there is:

- one list of 9 Strip descriptors

(size = 9 x 2 bytes = 18 bytes),

- 6 Text strings, each of them made of the character

codes from the line of text.

Text strings can be programmed anywhere in

RAM. The Descriptor list can be located at 16 dif-

ferent addresses in RAM. The address is defined

in the Display Control Register. It is consequently

possible to store up to 16 different pages in RAM.

The current Displayed page is specified in the Dis-

play Control Register. It refers to a given Page

Descriptor list.

Figure 8. Display Page: List of Character and Spacing strips

403F

-

-

-

-

-

-

-

RST

SELXTAL

This bit must be set to ONE in order to operate the oscillator in the external crystal

mode.

In its ZERO default state, this bit enables the internal RC mode oscillator.

TOP MARGIN

Text line number one

Text line number two

Text line number three

Text line number four

Text line number five

Text line number six

Strip 1 : Character Strip

Strip 2 : Character Strip

Strip 3 : Spacing Strip

Strip 4 : Character Strip

Strip 5 : Spacing Strip

Strip 6 : Character Strip

Strip 7 : Character Strip

Strip 8 : Character Strip

Strip 9 : Spacing Strip (Bottom Margin)

5