| Electronic Components Datasheet Search |
|
H8SX/1663M Datasheet(PDF) 1115 Page - Renesas Technology Corp |
|
|
|||||||||||||||||||||||||||||
H8SX/1663M Datasheet(HTML) 1115 Page - Renesas Technology Corp |
|
1115 / 1504 page ![]() Section 22 A/D Converter Rev. 2.00 Sep. 24, 2008 Page 1083 of 1468 REJ09B0412-0200 When consecutive A/D conversion is performed on eight channels* 1, A/D conversion starts on AN0 when CH3 = B'0. 2. When A/D conversion for each channel is completed, the A/D conversion result is sequentially transferred to the corresponding ADDR of each channel. 3. When A/D conversion of all selected channels is completed, the ADF bit in ADCSR is set to 1. If the ADIE bit is set to 1 at this time, an ADI interrupt request is generated. A/D conversion of the first channel in the group starts again. 4. The ADST bit is not cleared automatically, and steps 2 to 3 are repeated as long as the ADST bit remains set to 1. When the ADST bit is cleared to 0, A/D conversion stops and the A/D converter enters wait state. If the ADST bit is later set to 1, A/D conversion starts again from the first channel in the group. Notes: 1. Consecutive A/D conversion on eight channels is only possible in unit 0. 2. As conversion start trigger, units 0 and 1 of TMR, and units 2 and 3 of TMR are available in unit 0, and unit 1, respectively. ADST ADF ADDRA ADDRB ADDRC ADDRD Set*1 Clear*1 Clear*1 *2 Waiting for conversion Channel 0 (AN0) operation state Channel 1 (AN1) operation state Channel 2 (AN2) operation state Channel 3 (AN3) operation state Waiting for conversion A/D conver- sion 1 A/D conversion result 3 Waiting for conversion Waiting for conversion Waiting for conversion A/D conversion result 2 A/D conversion result 4 A/D conver- sion 5 A/D conver- sion 4 A/D conversion time Waiting for conversion A/D conver- sion 3 Waiting for conversion Waiting for conversion Waiting for conversion A/D conver- sion 2 A/D conversion result 1 Transfer A/D conversion consecutive execution Notes: 1. 2. ↓ indicates the timing of instruction execution by software. Data being converted is ignored. Figure 22.4 Example of A/D Conversion (Continuous Scan Mode, Three Channels (AN0 to AN2) Selected) |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |