Photometry

Tel: 954 .717 .4155

Fax: 954

Web: www.luminis.com

Specification

ECLIPSE

Post top mount

Sept. 2006 Rev. Feb.2007

W766

All exposed cast aluminum components are made of non corrosive

pure aluminum copper free (Aluminum is less than .1% copper

content.#356 alloy.)

The luminaire base assembly is built with a hinge

mechanism,allowing to tilt the top part of the luminaire to access the

electrical equipment. No tools required. The quick disconnect

ballast assembly is installed on a removable tray. The lamp is

accessible with a twist and lock action.

The ease of maintenance and lamp replacement concept will leave

the optical chamber free of finger prints and foreign particles,

Finish: All polyester powder baked coatings preceded with

a 5 baths preparation process. Meets military grade

MIL-C781706 with a 2000 hours salt spray test.

- Pulse rated medium base porcelain socket.

- One-piece molded silicone gasket with memory retention.

- High power factor CWA ballast.

- All stainless steel hardware.

- All Moving and removable parts are sealed with a

memory retention silicone gasket.

1- Min. .093” hard aluminum shade, with underside

white enamel to maximize light performance.

2- 1/2” dia. solid aluminum struts.

3- Clear U.V. protected high impact acrylic cylinder.

4- Cast Aluminum built-in hinge mechanism.

5- Cast Aluminum ballast housing with dissipation fins to maximize

heat dissipation and cool operation of ballast.

6- Cast Aluminum swing out housing,with safety cable retainer.

Push release button for quick access to electrical equipment.

(No tools required for maintenance.) Button may be locked for

limited access. (See option LB1)

7- Two piece reflector assembly with external housing same color as

luminaire, and inner semi specular elliptical reflector designed to

maximize light concentration uniformly over the

shade reflective surface.

luminaire tilt

action.

Access

to lamp

Access

Ballast

30”

Toll free: 888 .401 .6999

3

1

2

4

5

6

7

29 3/4”

E.P.A: 1.05 sq./ft

Max. weight: 40 lbs..

Installation: Mounts over a 4” or 5"O.D. Pole.X 4”ø tenon.

UL. Wet Location.

Certification

(Lamps by others)

Light source selection

120 V Standard factory

prewired

(If no voltage is specified)

For other voltages, please

specify with catalog number.

208 V

240 V

277 V

347 V

480 V

MH (ED17)

M70

M100

M150

M175

HPS (ED17)

H70

H100

H150

Model#

Voltage

Mounting

Finish

W766

H.I.D.

Mounting & E.P.A.

For options details and

specifications, please refer

to pages 41.42.43

Optional

Luminaires may be altered for design improvements or discontinued without prior notice.

Option

LB1

ACA1

ACW1

EC3P

EC3W

Standard selection

WHT:Snow white

BKT: Jet black

BZT: Bronze

GRT: Titanium gray

DGT: Gun metal

CHT: Champagne

MST: Matte silver

GNT: Forest green

Optional colors

CS: Custom color

RAL: RAL# color

(Refer to color chart)

Separate updated technical

specification sheets with related

models and light sources with

I.E.S formatted photometry are

available on

www.luminis.com.

H.I.D. G12/T6

120 V

277 V

MH (G12) T6

M39T

M70T

M150T

Page

35

L U M I

I

N S

Options

Accessories

LB1:

Release button lock

LF1:

Partially frosted

cylinder over lower

mid portion

STS30:

Stainless steel shade.

Electrical

FS:

Fuse

PH1:

120/277V photo cell

PH2:

347V photo cell