15 / 40 page
CY7C68053
Document # 001-06120 Rev *I
Page 15 of 40
7B
WAKEUP
Input
N/A
USB Wakeup. If the 8051 is in suspend, asserting this pin starts up the oscil-
lator and interrupts the 8051 to allow it to exit the suspend mode. Holding
WAKEUP asserted inhibits the MoBL-USB® chip from suspending. This pin
has programmable polarity (WAKEUP.4).
3F
SCL
OD
Z
Clock for the I2C interface. Connect to VCC_IO or VCC with a 2.2K–10K pull up
resistor. (An I2C peripheral is required.)
3G
SDA
OD
Z
Data for the I2C interface. Connect to VCC_IO or VCC with a 2.2K–10K pull up
resistor. (An I2C peripheral is required.)
5A
VCC_IO
Power
N/A
VCC. Connect this pin to 1.8V to 3.3V power source.
Provide the appropriate bulk and bypass capacitance for this supply rail.
5B
VCC_IO
Power
N/A
VCC. Connect this pin to 1.8V to 3.3V power source.
7E
VCC_IO
Power
N/A
VCC. Connect this pin to 1.8V to 3.3V power source.
8E
VCC_IO
Power
N/A
VCC. Connect this pin to 1.8V to 3.3V power source.
5C
VCC_D
Power
N/A
VCC. Connect this pin to 1.8V power source. (Supplies power to internal digital
1.8V circuits.)
Provide the appropriate bulk and bypass capacitance for this supply rail.
1G
VCC_A
Power
N/A
VCC. Connect this pin to 1.8V power source. (Supplies power to internal analog
1.8V circuits.)
1H
GND
Ground
N/A
Ground.
2H
GND
Ground
N/A
Ground.
4A
GND
Ground
N/A
Ground.
4B
GND
Ground
N/A
Ground.
4C
GND
Ground
N/A
Ground.
7D
GND
Ground
N/A
Ground.
8D
GND
Ground
N/A
Ground.
Table 7. FX2LP18 Pin Descriptions (continued)[9]
56 VFBGA
Name
Type
Default
Description
[+] Feedback
British ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
