AMS5010GN datasheet(2/2 Pages) ADMOS

2 / 2 page

Advanced Monolithic Systems, Inc.

www.advanced-monolithic.com

Phone (925) 443-0722

Fax (925) 443-0723

AMS5010

ABSOLUTE MAXIMUM RATINGS

Reverse Current

10mA

Storage Temperature TO-92 package

-65

°C to +150°C

Forward Current

10mA

Storage Temperature TO-52 package

-65

°C to +200°C

Operating Temperature Range

Lead Temperature (Soldering 25 sec.)

265

°C

NT, MT, LN, HN, GN

°C to 70°C

Maximum Power Dissipation (at 25

°C)

LT, KT, JT

-55

°C to +125°C

TO-52

750mW

TO-92

600mW

ELECTRICAL CHARACTERISTICS

Electrical Characteristics at IR = 500 µA, and TA = +25°C unless otherwise specified.

Parameter

Conditions

AMS5010

Min

Typ

Max

Units

Reference Voltage

IR = 100 µA

1.20

1.220

1.25

Reference Current (Note 3)

100

5000

µA

Reverse Current

To rated specs.

100

µA

Dynamic Output Impedance

IR = 100 µA

IR = 500 µA

Ω

RMS Noise Voltage

(Note 4)

IR = 500 µA,

10Hz

≤ f ≤ 10kHz

µV

Temperature Coefficient

(Note 5)

AMS5010G – J

AMS5010H – K

AMS5010L

AMS5010M

AMS501N

µA ≤ I

R ≤ 5mA

TMIN ≤ TA ≤ TMAX

100

ppm/°C

Note 1: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the

device is intended to be functional, but do not guarantee specific performance limits. For guaranteed specifications and test conditions, see the Electrical

Characteristics

. The guaranteed specifications apply only for the test conditions listed.

Note 2: For elevated temperature operation, Tj max is ≤+150°C

Thermal Resistance

TO-92

TO-52

JA (junction to ambient)

170°C/W (0.125” leads)

140°C/W

Note 3: Optimum performance is obtained at currents below 500µA. For current operation below 200µA, stray shunt capacitances should be limited to 20pF

or increased to 1

µF. If strays can not be avoided, a shunt capacitor of at least 1000pF is recommended.

Note 4: Guaranteed but not 100% production tested. These limits are not used to calculate average outgoing quality levels.

Note 5: The average temperature coefficient is defined as the maximum deviation of reference voltage at all measured temperatures between the operating

TMAX

and TMIN, divided by TMAX - TMIN.

AMS5010GN Datasheet(PDF) 2 Page - Advanced Monolithic Systems

AMS5010GN Datasheet(HTML) 2 Page - Advanced Monolithic Systems

Html Pages

1 2

Datasheet Download

Link URL