SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER

VOLTAGE 20 Volts CURRENT 2.0 Amperes

FEATURES

MECHANICAL DATA

MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS

Single phase, half wave, 60 Hz, resistive or inductive load.

For capacitive load, derate current by 20%.

2SS20L

SOD-123FL

Dimensions in inches and (millimeters)

* Low power loss, high efficiency

* Low leakage

* Low forward voltage drop

* High current capability

* High speed switching

* High surge capabitity

* High reliability

* Guard ring construction on dic

* Anti-ESD

* Epoxy: Device has UL flammability classification 94V-O

* Mounting position: Any

* Weight: 0.01 gram (Approx.)

* Flat lead frame

RATINGS

Maximum Recurrent Peak Reverse Voltage

Maximum RMS Voltage

Maximum DC Blocking Voltage

Peak Forward Surge Current 8.3 ms single half sine-wave

superimposed on rated load (JEDEC method)

SYMBOL

UNITS

Volts

Volts

Volts

Amps

2.0

25

Amps

0

C

Storage Temperature Range

Operating Temperature Range

2SS20L

20

14

20

2SS20L

-55 to + 150

-55 to + 125

0

C

Total Capacitance (Note 3)

75

pF

Typical Thermal Resistance Junction to Ambient (Note 1)

Typical Thermal Resistance Junction to Soldering (Note 2)

58

0

C/W

9

CHARACTERISTICS

Maximum Average Reverse Current

at Rated DC Blocking Voltage

SYMBOL

mAmps

Maximum Instantaneous Forward Voltage at 2.0A DC

1.0A DC

Volts

0.4

1.0

0.36

0.42

mAmps

UNITS

NOTES : 1. Part mounted on 5.08mmX5.08mm FR4 board with 25.4mmX25.4mm copper pad, 25% anode, 75% cathode.

2. RqJS calculated from the top center of the die stright down to the solder junction of the cathode tab.

3. Measure at 1MHz and applied reverse voltage of 4 Volts.

4. “Fully ROHS compliant”, “100% Sn plating (Pb-free)”.

5. Available for IR reflow & wave soldering.

2005-9

REV:O

.150 (3.8)

.142 (3.6)

.052 (1.32)

.050 (1.28)

.033 (0.85)

.030 (0.75)

.044 (1.12)

.043 (1.08)

.033 (0.85)

.030 (0.75)

.035 (0.90)

.028 (0.70)

.039 (1.00)

.035 (0.90)

.077 (1.95)

.069 (1.75)

.008 (0.20)

.114 (2.9)

.106 (2.7)