Tel: 886-2-66296288

Fax: 886-2-29174598

URL: http://www.princeton.com.tw

PT2249A_PT2250A V2.6

- 21 -

May, 2007

Remote Control Receiver IC

PT2249A_PT2250A

Symbol

Min.

Nom.

Max.

A

-

-

0.210

A1

0.015

-

-

A2

0.115

0.130

0.195

b

0.014

0.018

0.022

b1

0.014

0.018

0.020

b2

0.045

0.060

0.070

b3

0.030

0.039

0.045

c

0.008

0.010

0.014

c1

0.008

0.010

0.011

D

0.780

0.790

0.800

D1

0.005

-

-

E

0.300

0.310

0.325

E1

0.240

0.250

0.280

e

0.100 bsc

eA

0.300 bsc

eB

-

-

0.430

eC

0.000

-

0.060

L

0.115

0.130

0.150

Notes:

1. Controlling Dimension: INCHES.

2. Dimensioning and tolerancing per ANSI Y14.5M-1982.

3. Dimensions A, A1 and L are measured with the package seated in JEDEC Seating Plane Gauge

GS-3.

4. D, D1 and E1 dimensions do not include mold flash or protrusions. Mold flash or protrusions shall

not exceed 0.010 inch.

5. E and eA measured with the leads constrained to be perpendicular to datum -C-.

6. eB and eA are measured at the lead tips with the leads unconstrained.

7. N is the maximum number of terminal positions (N=16).

8. Pointed or rounded lead tips are preferred to ease insertion.

9. b2 and b3 maximum dimensions do not include dambar protrusions. Dambar protrusions shall not

exceed 0.010 (0.25mm).

10. Variation AB is a full lead package.

11. Distance between leads including dambar protrusions to be 0.005 in minimum.

12. Datum plane -H- coincident with the bottom of lead where lead exits body.

13. Refer to JEDEC MS-001 Variation AB.

JEDEC is the registered trademark of JEDEC SOLID STATE TECHNOLOGY ASSOCIATION.