705-5100-110 datasheet(21/68 Pages) MAGNETROL

21 / 68 page

57-600 Eclipse Guided Wave Radar Transmitter

2.6.5 Model 705 Menu: Step-By-Step Procedure

The following tables provide a complete explanation of

the software menus displayed by the Eclipse transmitter.

Use these tables as a step-by-step guide to configure the

transmitter based on a desired measurement type of:

• Level Only, Section 2.6.5.1

• Level and Volume, Section 2.6.5.2

• Interface Level, Section 2.6.5.3

• Interface Level and Volume, Section 2.6.5.4

The tables are separated to display the parameters based

on the measurement type. The second column presents

the menus shown on the transmitter display. The displays

are in the order they would appear if the arrow keys were

used to scroll through the menu. The numbers in the first

column are not shown on the display. They are only pro-

vided as a reference.

The third column provides the actions to take when con-

figuring the transmitter. Additional information or an

explanation of an action is given in the fourth column.

(Shaded sections are factory menu items).

2.6.5.1 Measurement Type: Level Only (Loop Control = Level)

Display

Action

Comment

*Status*

*Level *

*% Out *

* Loop *

Transmitter Display

LoopCtrl = Level.

Transmitter default display showing Status, Level, % Output, and

Loop values cycles every 5 seconds

Level

xxx.x

Transmitter Display

Transmitter displays Level Value in selected units

% Output

xx.x%

Transmitter Display

Transmitter displays % Output measurement derived from 20 mA

span

Loop

xx.xx mA

Transmitter Display

Transmitter displays Loop value (mA)

PrbModel

(select)

Select the type of probe

used

(Example: 7xR-x)

Select from 7xA-x, 7xB-x, 7xD-x, 7xE-x, 7xF-x, 7xF-E, 7xF-F,

7xF-4, 7xG-x, 7xF-P, 7xG, 7xJ-x, 7xK-x, 7xL, 7xM, 7xN, 7xP-x,

7xR-x, 7xS-x, 7xT-x, 7x1-x, 7x2-x, 7x5-x, 7x7-x as shown on

the probe nameplate

PrbMount

(select)

Select the type of probe

mounting

Select from NPT, BSP, or Flange

MeasType

(select)

Select type of measurement

Select Lvl Only

LvlUnits

(select)

Select level units

Select from cm, inches, feet or meters

Probe Ln

xxx.x

Enter the exact length of

probe

Probe length is printed on the nameplate and order information

and is the last three digits of the probe model number

Lvl Ofst

xxx.x

Enter the desired reading

when probe is dry

Level Offset is the distance from the probe tip to the desired 0

level point (-90 to 300"). Refer to Section 2.6.6

Dielctrc

(select)

Select range bounding the

dielectric constant of the

media

Select from 1.4–1.7; 1.7–3; 3–10; 10–100

705-5100-110 Datasheet(PDF) 21 Page - Magnetrol International, Inc.

705-5100-110 Datasheet(HTML) 21 Page - Magnetrol International, Inc.

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68

Datasheet Download

Link URL