| Electronic Components Datasheet Search |
|
UCD3138 Datasheet(PDF) 53 Page - Texas Instruments |
|
|
|
|||||||||||||||||||||||||||||
UCD3138 Datasheet(HTML) 53 Page - Texas Instruments |
|
53 / 68 page ![]() UCD3138 www.ti.com SLUSAP2 A – MARCH 2012 – REVISED MARCH 2012 4.19 Global I/O Up to 30 pins in UCD31xx can be configured to serve as a general purpose input or output pin (GPIO). This includes all digital input or output pins except for the RESET pin. The pins that cannot be configured as GPIO pins are the supply pins, ground pins, ADC-12 analog input pins, EADC analog input pins and the RESET pin. There are two ways to configure and use the digital pins as GPIO pins: 1. Through the centralized Global I/O control registers. 2. Through the distributed control registers in the specific peripheral that shares it pins with the standard GPIO functionality. The Global I/O registers offer full control of: 1. Configuring each pin as a GPIO. 2. Setting each pin as input or output. 3. Reading the pin’s logic state, if it is configured as an input pin. 4. Setting the logic state of the pin, if it is configured as an output pin. 5. Connecting pin/pins to high rail through internal pull up resistors. The Global I/O registers include Global I/O EN register, Global I/O OE Register, Global I/O Open Drain Control Register, Global I/O Value Register and Global I/O Read Register. The following is showing the format of Global I/O EN Register (GLBIOEN) as an example: BIT NUMBER 29:0 Bit Name GLOBAL_IO_EN Access R/W Default 00_0000_0000_0000_0000_0000_0000_0000 Bits 29-0: GLOBAL_IO_EN – This register enables the global control of digital I/O pins 0 = Control of IO is done by the functional block assigned to the IO (Default) 1 = Control of IO is done by Global IO registers. PIN NUMBER BIT PIN_NAME UCD3138-64 PIN UCD3138-40 PIN 29 FAULT[3] 43 NA 28 ADC_EXT_TRIG 12, 26 8 27 TCK 37 21 26 TDO 38 20 25 TMS 40 24 24 TDI 39 23 23 SCI_TX[1] 29 NA 22 SCI_TX[0] 14 22 21 SCI_RX[1] 30 NA 20 SCI_RX[0] 13 23 19 TMR_CAP 12, 26, 41 8, 21 18 TMR_PWM[1] 32 NA 17 TMR_PWM[0] 12, 26, 31, 37 21 16 PMBUS-CLK 15 9 15 PMBUS-DATA 16 10 14 CONTROL 30 20 13 ALERT 29 19 12 EXT_INT 26, 34 NA Copyright © 2012, Texas Instruments Incorporated Functional Overview 53 Submit Documentation Feedback Product Folder Link(s): UCD3138 |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |