ADAS3022 datasheet(8/40 Pages) AD

8 / 40 page

ADAS3022

Data Sheet

Rev. A | Page 8 of 40

ACQUISITION (n)

UNDEFINED

PHASE

POWER

CONVERSION (n – 1)

UNDEFINED

CNV

BUSY

DIN

SDO

NOTES

1. DATA ACCESS CAN OCCUR DURING A CONVERSION (

tDDC), AFTER A CONVERSION (tDAC), OR BOTH DURING AND AFTER A CONVERSION.

THE CONVERSION RESULT AND THE CFG REGISTER ARE UPDATED AT THE END OF A CONVERSION (EOC).

2. DATA ACCESS CAN ALSO OCCUR UP TO

tDDCA WHILE BUSY IS ACTIVE (SEE THE DIGITAL INTERFACE SECTION FOR DETAILS). ALL OF THE BUSY

TIME CAN BE USED TO ACQUIRE DATA.

3. A TOTAL OF 16 SCK FALLING EDGES IS REQUIRED FOR A CONVERSION RESULT. AN ADDITIONAL 16 EDGES ARE REQUIRED TO

READ BACK THE CFG RESULT ASSOCIATED WITH THE CURRENT CONVERSION.

4. CS CAN BE HELD LOW OR CONNECTED TO CNV. CS WITH FULL INDEPENDENT CONTROL IS SHOWN IN THIS FIGURE.

5. FOR OPTIMAL PERFORMANCE, DATA ACCESS SHOULD NOT OCCUR DURING THE SAMPLING EDGE. A MINIMUM TIME

OF THE APERTURE DELAY (

tAD) SHOULD ELAPSE PRIOR TO DATA ACCESS.

DATA

INVALID

SCK

16/32

NOTE 3

NOTE 1

NOTE 2

NOTE 1

NOTE 4

NOTE 5

CFG

INVALID

CFG (n + 2)

DATA (n – 1)

INVALID

ACQUISITION (n + 1)

UNDEFINED

CONVERSION (n)

UNDEFINED

DATA (n – 1)

INVALID

CFG (n + 2)

CFG (n + 3)

DATA (n)

INVALID

ACQUISITION

(n + 2)

CONVERSION (n + 1)

UNDEFINED

DATA (n)

INVALID

CFG (n + 3)

CFG (n + 4)

DATA (n + 1)

INVALID

ACQUISITION

(n + 3)

PHASE

CONVERSION

(n + 2)

CNV

BUSY

DIN

SDO

DATA (n + 1)

INVALID

SCK

CFG (n + 4)

CFG (n + 5)

DATA (n + 2)

ACQUISITION

(n + 4)

CONVERSION

(n + 3)

DATA (n + 2)

CFG (n + 5)

CFG (n + 6)

DATA (n + 3)

CONVERSION

(n + 4)

DATA (n + 3)

CFG (n + 6)

EOC

SOC

tDDC

tCYC

tQUIET

tDAC

tACQ

tAD

tDDCA

Figure 4. General Timing Diagram

ADAS3022 Datasheet(PDF) 8 Page - Analog Devices

ADAS3022 Datasheet(HTML) 8 Page - Analog Devices

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40

Datasheet Download

Link URL