LM317SSLASHNOPB datasheet(5/38 Pages) TI1

5 / 38 page

LM117, LM317-N

www.ti.com

SNVS774L – MAY 2004 – REVISED FEBRUARY 2011

LM117 Electrical Characteristics

(1) (continued)

Specifications with standard type face are for TJ = 25°C, and those with boldface type apply over full Operating

Temperature Range. Unless otherwise specified, VIN − VOUT = 5V, and IOUT = 10 mA.

LM117 (2)

Parameter

Conditions

Min

Typ

Max

Units

VOUT = 10V, f = 120 Hz, CADJ = 0 μF

Ripple Rejection Ratio

VOUT = 10V, f = 120 Hz, CADJ = 10 μF

Long-Term Stability

TJ = 125°C, 1000 hrs

0.3

NDS (TO-3) Package

Thermal Resistance,

θJC

NDT (TO) Package

°C/W

Junction-to-Case

NAJ (LCCC) Package

NDS (TO-3) Package

Thermal Resistance,

θJA

Junction-to-Ambient

NDT (TO) Package

186

°C/W

(No Heat Sink)

NAJ (LCCC) Package

LM317A and LM317-N Electrical Characteristics

(1)

Specifications with standard type face are for TJ = 25°C, and those with boldface type apply over full Operating

Temperature Range. Unless otherwise specified, VIN − VOUT = 5V, and IOUT = 10 mA.

LM317A

LM317-N

Parameter

Conditions

Min

Typ

Max

Min

Typ

Max

Units

1.238

1.250

1.262

1.25

Reference Voltage

≤ (VIN − VOUT) ≤ 40V,

1.225

1.250

1.270

1.20

1.25

1.30

10 mA

≤ IOUT ≤ IMAX

(1)

0.005

0.01

0.04

Line Regulation

≤ (VIN − VOUT) ≤ 40V

(2)

%/V

0.01

0.02

0.07

0.1

0.5

0.1

0.5

Load Regulation

10 mA

≤ IOUT ≤ IMAX

(1) (2)

0.3

1.5

Thermal Regulation

20 ms Pulse

0.04

0.07

0.04

0.07

%/W

Adjustment Pin Current

100

μA

Adjustment Pin Current

10 mA

≤ IOUT ≤ IMAX

(1)

0.2

μA

Change

≤ (VIN − VOUT) ≤ 40V

Temperature Stability

TMIN ≤ TJ ≤ TMAX

Minimum Load Current

(VIN − VOUT) = 40V

3.5

NDS, KTT Packages

1.5

2.2

3.4

(VIN − VOUT) ≤ 15V

DCY, NDE Packages

1.5

2.2

3.4

1.5

2.2

3.4

NDT, MDT Packages

0.5

0.8

1.8

0.5

0.8

1.8

Current Limit

NDS, KTT Packages

0.15

0.40

(VIN − VOUT) = 40V

DCY, NDE Packages

0.112

0.30

0.112

0.30

NDT, MDT Packages

0.075

0.20

0.075

0.20

RMS Output Noise, % of

10 Hz

≤ f ≤ 10 kHz

0.003

VOUT

VOUT = 10V, f = 120 Hz, CADJ = 0 μF

Ripple Rejection Ratio

VOUT = 10V, f = 120 Hz, CADJ = 10 μF

Long-Term Stability

TJ = 125°C, 1000 hrs

0.3

(1)

IMAX = 1.5A for the NDS (TO-3), NDE (TO-220), and KTT (TO-263) packages. IMAX = 1.0A for the DCY (SOT-223) package. IMAX = 0.5A

for the NDT (TO), MDT (PFM), and NAJ (LCCC) packages. Device power dissipation (PD) is limited by ambient temperature (TA), device

maximum junction temperature (TJ), and package thermal resistance (θJA). The maximum allowable power dissipation at any

temperature is : PD(MAX) = ((TJ(MAX) - TA)/θJA). All Min. and Max. limits are ensured to TI's Average Outgoing Quality Level (AOQL).

(2)

Regulation is measured at a constant junction temperature, using pulse testing with a low duty cycle. Changes in output voltage due to

heating effects are covered under the specifications for thermal regulation.

Submit Documentation Feedback

Product Folder Links: LM117 LM317-N

LM317S/NOPB Datasheet(PDF) 5 Page - Texas Instruments

LM317S/NOPB Datasheet(HTML) 5 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38

Datasheet Download

Link URL