STM32L152C6 datasheet(60/121 Pages) STMICROELECTRONICS

60 / 121 page

Electrical characteristics

STM32L151x6/8/B, STM32L152x6/8/B

60/121

Doc ID 17659 Rev 8

IDD (Stop)

Supply current in

Stop mode (

RTC disabled)

Regulator in LP mode, HSI and

HSE OFF, independent watchdog

and LSI enabled

TA = -40°C to 25°C

1.1

2.2

µA

Regulator in LP mode, LSI, HSI

and HSE OFF (no independent

watchdog)

TA = -40°C to 25°C

0.5

0.9

TA = 55°C

1.9

TA= 85°C

3.7

TA = 105°C

8.9

20(6)

IDD (WU

from Stop)

RMS (root mean

square) supply

current during

wakeup time

when exiting

from Stop mode

MSI = 4.2 MHz

VDD = 3.0 V

TA = -40°C to 25°C

MSI = 1.05 MHz

1.45

MSI = 65 kHz(7)

1.45

The typical values are given for VDD = 3.0 V and max values are given for VDD = 3.6 V, unless otherwise

specified.

Based on characterization, not tested in production, unless otherwise specified

LCD enabled with external VLCD, static duty, division ratio = 256, all pixels active, no LCD connected

LCD enabled with external VLCD, 1/8 duty, 1/3 bias, division ratio = 64, all pixels active, no LCD connected.

Based on characterization done with a 32.768 kHz crystal (MC306-G-06Q-32.768, manufacturer JFVNY)

with two 6.8pF loading capacitors.

Tested in production

When MSI = 64 kHz, the RMS current is measured over the first 15 µs following the wakeup event. For the

remaining time of the wakeup period, the current is similar to the Run mode current.

Table 22.

Typical and maximum current consumptions in Stop mode

Symbol

Parameter

Conditions

Typ(1)

Max

(1)(2)

Unit

STM32L152C6 Datasheet(PDF) 60 Page - STMicroelectronics

STM32L152C6 Datasheet(HTML) 60 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL