Copyright

© ANPEC Electronics Corp.

Rev. A.4 - Aug., 2013

www.anpec.com.tw

2

APL3526/B

Ordering and Marking Information

Note : ANPEC lead-free products contain molding compounds/die attach materials and 100% matte tin plate termination finish; which

are fully compliant with RoHS. ANPEC lead-free products meet or exceed the lead-free requirements of IPC/JEDEC J-STD-020D for

MSL classification at lead-free peak reflow temperature. ANPEC defines “Green” to mean lead-free (RoHS compliant)and halogen

free (Br or Cl does not exceed 900ppm by weight in homogeneous material and total of Br and Cl does not exceed 1500ppm by

weight).

Symbol

Parameter

Rating

Unit

BAIS to GND Voltage

-0.3 ~ 6

V

VIN to GND Voltage

-0.3 ~ 6

V

VOUT to GND Voltage

-0.3 ~ 6

V

EN or ENB to GND Voltage

-0.3 ~ 6

V

Maximum Junction Temperature

-40 ~ 150

Storage Temperature

-65 ~ 150

Maximum Lead Soldering Temperature (10 Seconds)

260

Note1: Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are

stress ratings only and functional operation of the device at these or any other conditions beyond those indicated under "recom-

mended operating conditions" is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device

reliability.

Thermal Characteristics

Symbol

Parameter

Typical Value

Unit

θ

JA

Junction-to-Ambient Resistance in Free Air

(Note 2)

75

Note 2:

θ

of TDFN2x2-8 is soldered directly on the PCB.

APL3526/B

Package Code

Operating Ambient Temperature Range

I : -40 to 85

Handling Code

TR : Tape & Reel

Assembly Material

Handling Code

TemperatureRange

Package Code

G : Halogen and Lead Free Device

Assembly Material

QB : TDFN2x2-8

X-Date Code

APL3526 QB:

L26

X

Enable Function

B : Active Low

X-Date Code

APL3526B QB:

26B

X

Enable Function

Blank : Active High