DIM250PLM33-TS000

2/8

Caution: This device is sensitive to electrostatic discharge. Users should follow ESD handling procedures.

www.dynexsemi.com

ABSOLUTE MAXIMUM RATINGS

Stresses above those listed under ‘Absolute Maximum Ratings’ may cause permanent damage to the device. In

extreme conditions, as with all semiconductors, this may include potentially hazardous rupture of the package.

Appropriate safety precautions should always be followed. Exposure to Absolute Maximum Ratings may affect

device reliability.

Symbol

Parameter

Test Conditions

Max.

Units

Collector-emitter voltage

3300

V

Gate-emitter voltage

±20

V

Continuous collector current

250

A

Peak collector current

500

A

Max. transistor power dissipation

2.6

kW

I

Diode I

20

kA

Diode I

20

kA

Isolation voltage

– per module

Commoned terminals to base plate.

AC RMS, 1 min, 50Hz

6000

V

Partial discharge

– per module

10

pC

THERMAL AND MECHANICAL RATINGS

Internal insulation material:

AlN

Baseplate material:

AlSiC

Creepage distance:

33mm

Clearance:

20mm

CTI (Comparative Tracking Index):

>600

Symbol

Parameter

Test Conditions

Min

Typ.

Max

Units

Thermal resistance

– transistor

Continuous dissipation -

junction to case

-

-

48

°C/kW

Thermal resistance

– diode

(IGBT Arm)

Continuous dissipation -

junction to case

-

-

96

°C/kW

Thermal resistance

– diode

(Diode Arm)

-

-

96

°C/kW

Thermal resistance

–

case to heatsink (per module)

Mounting torque 5Nm

(with mounting grease)

-

-

16

°C/kW

Junction temperature

Transistor

-

-

150

°C

Diode

-

-

150

°C

Storage temperature range

-

-40

-

125

°C

Screw torque

Mounting

– M6

-

-

5

Nm

Electrical connections

– M5

-

-

4

Nm