MAX463 datasheet(4/16 Pages) MAXIM

4 / 16 page

10k

100k

MAX468

GAIN AND PHASE RESPONSES

FREQUENCY (Hz)

100M

–3

–2

–1

180

108

144

10M

GAIN

PHASE

100k

MAX464

OUTPUT IMPEDANCE

vs. FREQUENCY

FREQUENCY (Hz)

100M

0.01

0.1

100

10M

10k

100k

MAX468

POWER-SUPPLY REJECTION RATIO

vs. FREQUENCY

FREQUENCY (Hz)

100M

10M

10k

V+

V–

Two-Channel, Triple/Quad

RGB Video Switches and Buffers

_______________________________________________________________________________________

ELECTRICAL CHARACTERISTICS (continued)

(V+ = 5V, V- = -5V, -2V

≤ VIN ≤ +2V, RLOAD = 75Ω, unless otherwise noted.)

PARAMETER

SYMBOL

UNITS

Address Setup Time (Note 11)

tSU

CONDITIONS

TA = TMIN to TMAX

MIN

MAX

—

–

, A0, C

—

–

, LE; MAX463–MAX466

Address Hold Time (Note 11)

—

–

, A0, C

—

–

, LE; MAX463–MAX466

—

–

Pulse Width Low (Note 11)

tCS

—

–

, A0, C

—

–

, LE; MAX463–MAX466

Note 1: Voltage gain accuracy for the unity-gain devices is defined as [(VOUT - VIN) at VIN = 1V - (VOUT - VIN) at VIN = -1V]/2.

Note 2: Voltage gain accuracy for the gain-of-two devices is defined as [(VOUT/2 - VIN) at VIN = 1V - (VOUT/2 - VIN) at VIN = -1V]/2.

Note 3: Tested with a 3.58MHz sine wave of amplitude 40IRE superimposed on a linear ramp (0IRE to 100IRE), RL = 150Ω to ground.

Note 4: Tested with the selected input connected to ground through a 75

Ω resistor, and a 4VP-P sine wave at 10MHz driving adjacent input.

Note 5: Tested in the same manner as described in Note 4, but with all other inputs driven.

Note 6: Tested with LE = 0V, E

—

–

= V+, and all inputs driven with a 4VP-P, 10MHz sine wave.

Note 7: Measured from a channel switch command to measurable activity at the output.

Note 8: Measured from where the output begins to move to the point where it is well defined.

Note 9: Measured from a disable command to amplifier in a non-driving state.

Note 10: Measured from an enable command to the point where the output reaches 90% current out.

Note 11: Guaranteed by design.

TA = +25°C

MIN

TYP

MAX

__________________________________________Typical Operating Characteristics

(TA = +25°C, unless otherwise noted.)

MAX463 Datasheet(PDF) 4 Page - Maxim Integrated Products

MAX463 Datasheet(HTML) 4 Page - Maxim Integrated Products

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Datasheet Download

Link URL