H7CX-R11-N datasheet(47/56 Pages) OMRON

47 / 56 page

H7CX-R

@-N

Operation in Run Mode

Output Mode: HI or LO

Output Mode: HI-LO or AREA

H7CX-R11

@-N

H7CX-R11W

@-N

Displayed for Models Other Than “-W” Models

Displayed for “-W” Models

Measurement value

Comparison value

Bottom hold value

Peak hold value

Bottom hold value 1

Peak hold value 2

Bottom hold value 2

Peak hold value 1

Measurement value

Comparison value 1

Measurement value

Comparison value 2

Measurement value 1

Measurement value 2

Comparison value 1

Comparison value 2

• Set each digit using the individual

U Keys.

• Measurement Value

Displays the currently measured value.

• Comparison Value, Comparison Value 1, and

Comparison Value 2

Set the comparison value, comparison value 1,

and comparison value 2.

The measurement value is compared to

comparison value, comparison value 1, and

comparison value 2 and an output is made

according to the selected output mode.

*1 Peak/bottom hold enabled

• Peak/bottom hold value

The peak (maximum) and bottom (minimum)

values are displayed after counting starts.

• Peak/bottom hold value 2

Peaks (maximums) 1 and 2 and bottoms

(minimums) 1 and 2 are displayed after counting

starts.

Note: The held values will be initialized when the

Hold Key or reset 1 input is turned OFF

while peak/bottom hold values 1 and 2 are

being displayed.(The reset 2 input

operates in the same way if the input

mode is set to 2-input mode.)

H7CX-R11-N Datasheet(PDF) 47 Page - Omron Electronics LLC

H7CX-R11-N Datasheet(HTML) 47 Page - Omron Electronics LLC

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56

Datasheet Download

Link URL