| Electronic Components Datasheet Search |
|
HD3SS214 Datasheet(PDF) 10 Page - Texas Instruments |
|
|
|
|||||||||||||||||||||||||||||
HD3SS214 Datasheet(HTML) 10 Page - Texas Instruments |
|
10 / 25 page ![]() HD3SS214 SLAS907 – DECEMBER 2015 www.ti.com Feature Description (continued) 8.3.2 HPD, AUX, and DDC Switching HPD, AUX, and DDC switching is supported through the HD3SS214. This enables the device to work in multiple application scenarios within multiple electrical standards. The AUXA/B and DDCA/B lines can both be switched to the AUXC port. This feature supports DP++ or AUX only adapters. For HDMI applications, the DDC channels are switched to the DDC_C port only and the AUX channel can remain active or the end user can make it float. 8.3.3 Output Enable and Power Savings The HD3SS214 has two power modes, active/normal operating mode, and standby mode. During standby mode, the device consumes very little current to save the maximum power. To enter standby mode, the OE control pin is pulled low and must remain low. For active/normal operation, the OE control pin should be pulled high to VDD through a resistor. 8.4 Device Functional Modes The HD3SS214 behaves as a two to one or one to two using high bandwidth pass gates. The input ports are selected using the Dx_SEL pin and Dx_SEL pin which are shown in Table 1. Table 1. AUX/DDC Switch Control Logic(1) CONTROL LINES SWITCHED I/O PINS (2) AUX_S DCz(p) Pin DCz(n) Pin Dx_SEL HPDC Pin AUXA AUXB AUXC DDCA DDCB DDCC EL z = 0, 1 ,2 or 3 z = 0, 1 ,2 or 3 To/From L L DAz(p) DAz(n) HPDA To/From AUXC Z Z Z Z AUXA To/From L H DBz(p) DBz(n) HPDB Z To/From AUXC Z Z Z AUXB To/From To/From H L DAz(p) DAz(n) HPDA Z Z Z Z DDCA AUXC To/From H H DBz(p) DBz(n) HPDB Z Z Z To/From AUXC Z DDCB To/From To/From M (2) L DAz(p) DAz(n) HPDA To/From AUXC Z Z To/From DDCA AUXA DDCC To/From M (2) H DBz(p) DBz(p) HPDB Z To/From AUXC Z To/From DDCC To/From DDCB AUXB (1) OE pin - For normal operation, drive OE high. Driving the OE pin low will disable the switch. Note: The ports which are not selected by the control lines will be in high impedance status. (2) Z = High Impedance 10 Submit Documentation Feedback Copyright © 2015, Texas Instruments Incorporated Product Folder Links: HD3SS214 |
|
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |