ST25TA02K-P datasheet(39/64 Pages) STMICROELECTRONICS

39 / 64 page

DocID027794 Rev 2

39/64

ST25TA02K-P

RF command sets

5.6.7

ReadBinary command

On receiving the ReadBinary command, the ST25TA02K-P reads the requested memory

field and sends back its value in the R-APDU response.

Before sending a ReadBinary command, a file shall be selected by using a Select

command.

The Response of the ReadBinary command is successful when the data to be read is within

the selected file (a); in other words, when the sum of P1-P2 and Le fields is equal to or lower

than the selected file length.

Table 31 defines the ReadBinary command.

Table 32 defines the R-APDU of the ReadBinary command.

Note:

For further return codes and definitions, refer to Section 5.6.2: Status and error codes.

a. For more details about CC file, refer to Section 3.1.2: CC file layout.

For more details about NDEF file, refer to Section 3.1.3: NDEF file layout.

For more details about System file, refer to Section 3.1.4: System file layout.

Table 31. C-APDU of the ReadBinary command

Name

CLA

INS

P1 & P2

Data

0x00

0xB0

2 bytes

1 byte

Class byte

Read instruction code

Offset in the file selected

(empty field)

Number of bytes to read between

0x01

≤Le ≤max(Selected File length, 0xFFh)

Table 32. R-APDU of the ReadBinary command

Data

SW1

SW2

Comment

Length

1 byte

Value

Content read

0x90

0x00

Command completed

Value

0x67

0x00

Wrong length

Value

0x69

0x82

Security status not satisfied

Value

0x6A

0x82

File or application not found

Value

0x6E

0x00

ST25TA02K-P Datasheet(PDF) 39 Page - STMicroelectronics

ST25TA02K-P Datasheet(HTML) 39 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64

Datasheet Download

Link URL