MICROWAVE CORPORATION

14 - 199

For price, delivery, and to place orders, please contact Hittite Microwave Corporation:

12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373

Order Online at www.hittite.com

14

HMC345LP3

v03.0604

Evaluation PCB

The circuit board used in the final application should be

generated with proper RF circuit design techniques. Signal

lines at the RF port should have 50 ohm impedance and the

package ground leads and backside ground slug should be

connected directly to the ground plane similar to that shown

above. The evaluation circuit board shown above is avail-

able from Hittite Microwave Corporation upon request.

List of Material

GaAs MMIC SP4T NON-REFLECTIVE

POSITIVE CONTROL SWITCH, DC - 8.0 GHz

Item

Description

J1 - J7

PC Mount SMA RF Connector

J8 - J11

DC Pin

C1 - C7

100 pF Capacitor, 0402 Pkg.

C8

10k pF Capacitor, 0603 Pkg.

U1

HMC345LP3 SP4T Switch

PCB*

104708 Evaluation PCB 1.29”x1.55”

* Circuit Board Material: Rogers 4350