B23

Push-Pull Complete Locking Coaxial Connectors (PC Card Type

2

2 Mountable)

POD3 Series

sFeatures

1. Excellent push-pull complete locking

method for ease of operation

The connector coupling portion uses a Hirose Electric

original push-pull complete locking system.

1) A sure lock is obtained by holding the connector outside

tube portion and just giving it a light push.

2) Positive lock prevents easy disconnection.

To remove the connector, just hold the connector outside

tube portion and pull for a simple release of the lock

sApplications

Wireless LAN cards, GPS cards, and miniature wireless

communications devices.

sFunction Diagrams

Jack Side

sJack

POD3-J-DFS111

sReceptacle

POD3-R-1

sConversion Adapter

(Coupling portion: SMA side jack - POD3 side jack)

HRMJ-POD3J

Plug Side

sPlug Receptacle

POD3-PR-1

sConversion Adapter

(Coupling portion: SMA side jack - POD3 side plug)

HRMJ-POD3P

2. Type II PC Card Mountable

The receptacle thickness is 3.9 mm which permits

mounting to the back side of a type II card.

(Note) that at the time of card mounting, use of 0.3mm offset of the board mounting

surface from the card center line will result in the same card center axis and

connector center axis.

3. High Degree of Matching

The top-touch system used for the coupling method

achieves high frequency performance from 0 to 3 GHz

with a V.S.W.R. of 1.3 or less.

4. Ultra-Miniature

As a complete locking type, this series achieves a size

reduction of approximately 50% in the direction of the

diameter as compared to our original POD1 Series.

5. Accommodates Ultra-Fine Cable

These connectors accommodate the use of ultra-fine

coaxial Teflon cable which permits high-density wiring

inside equipment.

Ø1.48 (single-layer shielded cable)

....CO-6F FH-SB manufactured by Hitachi Cable, Ltd.

....DFS111-UL1979 manufactured by Junkosha Co., Ltd.

Board Mounting Example