LM324ADE4 datasheet(4/40 Pages) TI1

4 / 40 page

LM224K, LM224KA, LM324, LM324A, LM324K, LM324KA, LM2902

LM124, LM124A, LM224, LM224A, LM2902V, LM2902K, LM2902KV, LM2902KAV

SLOS066W – SEPTEMBER 1975 – REVISED MARCH 2015

www.ti.com

6 Specifications

6.1 Absolute Maximum Ratings

over operating free-air temperature range (unless otherwise noted)

(1)

LMx24, LMx24x,

LM2902

LMx24xx, LM2902x,

UNIT

LM2902xx, LM2902xxx

MIN

MAX

MIN

MAX

Supply voltage, VCC

(2)

±13

±16

Differential input voltage, VID

(3)

±26

±32

Input voltage, VI (either input)

–0.3

to 32

Duration of output short circuit (one amplifier) to ground at (or

Unlimited

below) TA = 25°C, VCC ≤ 15 V

(4)

Operating virtual junction temperature, TJ

150

°C

Case temperature for 60 seconds

FK package

260

°C

Lead temperature 1.6 mm (1/16 inch)

J or W package

300

°C

from case for 60 seconds

Storage temperature, Tstg

–65

150

–65

150

°C

(1)

Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings

only, and functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating

Conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

(2)

All voltage values (except differential voltages and VCC specified for the measurement of IOS) are with respect to the network GND.

(3)

Differential voltages are at IN+, with respect to IN

−.

(4)

Short circuits from outputs to VCC can cause excessive heating and eventual destruction.

6.2 ESD Ratings

VALUE

UNIT

LM224K, LM224KA, LM324K, LM324KA, LM2902K, LM2902KV, LM2902KAV

Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001(1)

±2000

V(ESD)

Electrostatic discharge

Charged-device model (CDM), per JEDEC specification JESD22-C101

±1000

LM124, LM124A, LM224, LM224A, LM324, LM324A, LM2902, LM2902V

Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001 (1)

±500

V(ESD)

Electrostatic discharge

Charged-device model (CDM), per JEDEC specification JESD22-C101

±1000

(1)

JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process.

6.3 Recommended Operating Conditions

over operating free-air temperature range (unless otherwise noted)

LMx24, LMx24x, LMx24xx,

UNIT

LM2902

LM2902x, LM2902xx, LM2902xxx

MIN

MAX

MIN

MAX

VCC Supply voltage

VCM Common-mode voltage

VCC – 2

LM124

–55

125

LM2904

–40

125

TA Operating free air

°C

temperature

LM324

LM224

–25

Submit Documentation Feedback

Product Folder Links: LM224K LM224KA LM324 LM324A LM324K LM324KA LM2902 LM124 LM124A LM224

LM224A LM2902V LM2902K LM2902KV LM2902KAV

LM324ADE4 Datasheet(PDF) 4 Page - Texas Instruments

LM324ADE4 Datasheet(HTML) 4 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40

Datasheet Download

Link URL