Table is for reference only. See individual Series' datasheets for specific screening.

NON

/HP

/HL

/HR

/KP

/KL

/KR

non-destruct wire bond pull, Method 2023

n

n

n

pre-cap inspection, Method 2017, 2032

n

n

n

n

n

n

n

temperature cycle (10 times) (Qual 100 times)

Method 1010, Cond. C, -65°C to +150°C, ambient

n

n

n

n

n

n

n

constant acceleration

Method 2001, 3000 g (Qual 5000 g)

n

n

n

n

n

n

n

pind, test Method 2020, cond. a

n

n

n

pre burn-in test, group a, subgroups 1 and 4

n

n

n

n

96 hours

n

160 hours

n

n

n

2 x 160 hours (includes mid-BI test)

n

n

n

Final electrical test, Mil-prF-38534, group a,

Subgroups 1 and 4: +25°C case

n

Subgroups 1 through 6, -55°C, +25°C, +125°C case

n

n

n

n

n

n

Hermeticity test, Method 1014

n

n

n

n

n

n

n

n

n

n

n

n

n

n

radiography, Method 2012

n

n

n

post radiography electrical test, +25°c case

Final visual inspection, Method 2009

n

n

n

n

n

n

n

n

n

n

n

n

n

n

n

n

n

Test methods are referenced to MIL-STD-883 as determined by MIL-PRF-38534.

notes

1. Our Redmond facility has a DLA approved RHA plan for Interpoint power

products. Our SMD products with RHA “L” or “R” code meet DLA requirements.

2. non-QML prototype products may not meet all of the requirements of

MIL-PRF-38534.

3. All processes are QML qualified and performed by certified operators.

4. “O” in the RHA designator position in Interpoint model numbers indicates DLA

RHA “-” defined as no RHA.

5. not required by DLA but performed to assure product quality.

6. Burn-in temperature designed to bring the case temperature to +125°C minimum.

Burn-in is a powered test.

7. High dose rate test.

8. no destructive events or SEL.

For slH

Crane Aerospace & Electronics Power Solutions

SLH Single and Dual, SLH Rev AB - 2015.10.22. This revision supersedes all previous releases. All technical information is believed

to be accurate, but no responsibility is assumed for errors or omissions. Crane Electronics, Inc reserves the right to make changes

in products or specifications without notice. Interpoint is a registered trademark of Crane Co. SLH Series is a trademark of Crane

Electronics, Inc. Copyright © 1999-2015 Crane Electronics, Inc. All rights reserved. www.craneae.com/interpoint

Page 12 of 12

SLH Single and Dual DC-DC Converters

28 VoLt input – 1.5 Watt