4

///  /

MTU 4R0075 GS30 (30 kWe) - Standby

WEIGHTS AND DIMENSIONS

SOUND DATA

Unit Type

Standby Full Load

Level 0: Open Power Unit dB(A)

C/F

WPE - No Sound Attenuation dB(A)

C/F

CQE dB(A)

C/F

Drawing above for illustration purposes only, based on standard open power 480 volt generator set. Lengths may vary with other voltages. Do not use for installation design.

See website for unit specific template drawings.

Sound data is provided at 7 m (23 ft). Generator set tested in accordance with ISO 8528-10 and with infinite exhaust.

Weights and dimensions are based on open power units and are estimates only. Consult the factory for accurate weights and dimensions for your specific generator set.

EMISSIONS DATA

Fuel Type

CO

Natural Gas

5.39

21.98

Liquid Propane

7.41

24.36

All units are in g/hp-hr and are EPA weighted cycle values.

Emission levels of the engine may vary with ambient

temperature, barometric pressure, humidity, fuel type and

quality, installation parameters, measuring instrumentation, etc.

The data was obtained in compliance with US EPA regulations.

RATING DEFINITIONS AND CONDITIONS

// 

Standby ratings apply to installations served by a reliable

utility source. The standby rating is applicable to varying

loads for the duration of a power outage. No overload

capability for this rating. Ratings are in accordance with

ISO 3046-1, BS 5514, and AS 2789. Average load

factor: ≤ 85%.

// 

Deration Factor:

Altitude: Consult your local MTU Onsite Energy Power

Generation Distributor for altitude derations.

Temperature: Consult your local MTU Onsite Energy Power

Generation Distributor for temperature derations.

C/F = Consult Factory/MTU Onsite Energy Distributor

N/A = Not Available

MTU Onsite Energy

A Rolls-Royce Power Systems Brand

www.mtuonsiteenergy.com

System

Dimensions (L x W x H)

Weight (dry)

Open Power Unit (OPU)

1,676 x 864 x 1,156 mm (66 x 34 x 45.5 in)

458 kg (1,010 lb)