SAW FILTER

HDF948A

S-6

www.shoulder.cn

Tel:0755-82916880

Fax:0755-82916881

E-mail:info@shoulder.cn

Page 6 of 8

5-8-1 Pulling test

Weight along with the direction of lead without an shock 1kg. The device shall satisfy all

the initial Characteristics.

5-8-2 Bending test

Lead shall be subject to withstand against 90℃ bending with 450g weight in the

direction of thickness. This operation shall be done toward both direction. The device

shall show no evidence of damage and shall

6. REMARK

6.1 Static voltage

Static voltage between signal load & ground may cause deterioration &destruction of the

component. Please avoid static voltage.

6.2 Ultrasonic cleaning

Ultrasonic vibration may cause deterioration & destruction of the component. Please

avoid ultrasonic cleaning

6.3 Soldering

Only leads of component may be soldered. Please avoid soldering another part of

component.

7. Packing

7.1 Dimensions

(1) Carrier Tape: Figure 1

(2) Reel: Figure 2

(3) The product shall be packed properly not to be damaged during transportation and storage.

7.2 Reeling Quantity

1000 pcs/reel

7’’

3000 pcs/reel

13’’

7.3 Taping Structure

(1) The tape shall be wound around the reel in the direction shown below.

(2) Label