2

■Product Specifications

Ratings

Current Rating

3.0A (28 AWG)

3.2A (26 AWG)

4.0A (24 AWG)

Operating Temperature Range

Operating Humidity Range

-40 to +105ç (Note 1)

20 to 80%

Voltage Rating

AC/DC 350V

Storage Temperature Range

Storage Humidity Range

-10 to +60ç (Note 2)

40 to 70% (Note 2)

Item

Specifications

Conditions

1. Insulation

resistance

1000Mø min.

Measured at DC 500V

2. Withstand voltage

No flashover or breakdown

AC 1,200V is applied for 1 minute.

3. Contact resistance

10mø max.

Measured at 1mA and no higher than 20mV

4. Vibration

Resistance

No electrical discontinuity for 1µs or longer

10 cycles in each of three directions at frequency

10-55 Hz, half amplitude 0.75mm

5. Shock Resistance

No electrical discontinuity for 1µs or longer

Accelerated velocity : 490m/s

3 directions, 3 times for each of the three directions

6. Moisture-

resistance

Contact resistance : 20mø max.

Insulation resistance : 500Mø min.

Temperature : 40±2ç ; humidity : 90 to 95%, left

as it is for 96 hours

7. Temperature

cycles

Contact resistance : 20mø max.

Insulation resistance : 500Mø min.

-55ç : 30 minutes

→ 5 - 35ç : 2 - 3 minutes

→ 105℃ : 30 minutes → 5 - 35ç : 2 - 3 minutes)

5 cycles

8. Durability

Contact resistance : 20mø max.

30 mating cycles

9. Resistance to

solder heat

The resin components will not become

deformed or lose performance due to

deformities

Reflow : according to the recommended

temperature profile

Hand soldering : temperature of soldering iron at

350ç±10ç for 3 seconds

Note 1 : Includes the temperature rise caused by current flow.

Note 2 : The storage condition refers to long-term storage of the product on the shelf before assembly. Please use the operating

temperature for temporary storage such as pre-assembly and during shipping.

■Materials / Finish

Product

Part

Materials

Finish

UL specification

Header

Insulator

LCP

Natural

UL94V-0

Contact

Brass

Tin Plated

−

Crimp socket

Insulator

LCP

Natural

UL94V-0

Crimp contact

Contact

Copper Alloy

Tin Plated

−

■Product Number Structure

Refer to the chart below when determining the product specifications from the product number.

Please select from the product numbers listed in this catalog when placing orders.

●Header connector

DF 61Y - * P - 2.2 V

❶❷

❸ ❹

❺

❻

●Socket connector

DF 61Y - * S - 2.2 C

❶❷

❸ ❹

❺

❻

●Crimp contact

DF 65 - 2428 SCF

❶❷

 2428：24 to 28 AWG

 SCF : Socket contact・Reel

: 61Y

: 2

P : Header

: 2.2mm

 Ｖ

: 2

 S：socket

 C : crimp socket