VY1COMPACT datasheet(6/8 Pages) VISHAY

6 / 8 page

VY1 Compact Series

www.vishay.com

Vishay BCcomponents

Revision: 16-Jan-17

Document Number: 28555

For technical questions, contact: cdc@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

PERFORMANCE

TEST

TEST CONDITION

TEST LIMITS

Visual and mechanical



inspection

Optical inspection, dimensions measured with caliper

No visible damage, marking legible

Capacitance (C)

25 °C ± 3 °C , relative humidity (RH)

 75 %,

1.0 VRMS ± 0.2 VRMS at 1 kHz

Capacitance within specified tolerance

Dissipation factor (DF)

 2.5 %

Insulation resistance (IR)

Measured within 60 s ± 5 s after charging at 500 VDC

10 000 M

 min.

Dielectric strength

4000 VAC at 50 Hz/60 Hz for 1 min, 50 mA max.

No failure

Temperature

characteristic

 75 %, 1.0 V

RMS ± 0.2 VRMS at 1 kHz

+22 % / -56 %

Impulse voltage

Pulse voltage: 10 kV



Pulses per polarity: 10



Polarity: ± (both)



Time between pulses of same polarity: 20 s



Time between pulses of different polarity: 30 s

No failure

Life test

1000 h at 125 °C ± 2 °C, 850 VAC / 50 Hz;

once every hour 1000 VAC for 0.1 s

External appearance: no visible damage



C/C  ± 15 %

 5 %

 3000 M

Dielectric strength: no failure

Damp heat test



(85 / 85 / 1000 h)

1000 h + 48 h / - 0 h at 85 % relative humidity, 85 °C ± 3 °C,



loading voltage: 760 VAC

No failure

Humidity test

500 h at 500 VAC, 50 Hz and 500 h unloaded

40 °C, RH = 90 % to 95%

External appearance: no visible damage



C/C  ± 15 %

 5 %

 3000 M

Dielectric strength: no failure

Robustness of

termination

Pull test: 0.5 kg tensile weight in radial direction for 10 s ± 1 s



Bending strength: capacitor body rotated by 90° in both directions

No damage to capacitor body and lead wire

Soldering effect

Immersion of lead wires into 260 °C ± 5 °C solder for 10 s ± 2 s;



min. distance from body: 1.5 mm



Hand soldering at 400 °C ± 10 °C for 3 s to 4 s;



min. distance from body: 1.5 mm

External appearance: no visible damage



C/C  ± 10 %

Dielectric strength: no failure

Vibration test

Solder the capacitor onto test jig (glass epoxy body) and use resin

(adhesive) to stick the body to the test jig.



The capacitor must be soldered firmly to the supporting lead wire.

Vibration change from 10 Hz to 2000 Hz and back to 10 Hz;



Total amplitude: 1.5 mm; Acceleration: 100 m/s2;



Sweep rate: 1 oct/min, each axis 2 h (6 h in total)

External appearance: no visible damage



Capacitance within specified tolerance



 2.5 %

 10 000 G

Resin (adhesive)

VY1COMPACT Datasheet(PDF) 6 Page - Vishay Siliconix

VY1COMPACT Datasheet(HTML) 6 Page - Vishay Siliconix

Html Pages

1 2 3 4 5 6 7 8

Datasheet Download

Link URL