MLX90367 datasheet(13/36 Pages) MELEXIS

13 / 36 page

MLX90367

Triaxis

® Position Sensor IC feat. SENT

MLX90367

Page 13 of 36

Datasheet

Rev 5.2

Dec. 15, 15

11.

MLX90367 Magnetic Specification

DC Operating Parameters at Nominal Supply Voltage (unless otherwise specified) and for TA as specified

by the Temperature suffix (E or K or L).

Parameter

Symbol

Test Conditions

Min

Typ

Max

Units

Magnetic Flux Density

BX, BY(11)

√[ BX 2 + BY 2 ]

70(12)

Magnetic Flux Density

BZ(13)

126

Magnetic Flux Norm

Norm

√[ BX 2 + BY 2 + (Bz/1.2)2 ]

20(12)

IMC Gain(14)

GainIMC

1.2

1.3

1.4

Magnet Temperature Coefficient

TCm

-2400

ppm/°C

12.

MLX90367 CPU & Memory Specification

The DSP is based on a 16 bit RISC µController. This CPU provides 2.5 Mips while running at 10 MHz.

Parameter

Symbol

Test Conditions

Min

Typ

Max

Units

ROM

RAM

384

EEPROM

128

11 The condition must be fulfilled for at least one field BX or BY.

12 Above 70 mT, the IMC starts saturating yielding to an increase of the linearity error.

13 Below 20 mT, the performances slightly degrade due to a reduction of the signal-to-noise ratio, signal-to-offset ratio.

14 This is the magnetic gain linked to the Integrated Magneto Concentrator (IMC) structure. It applies to BX and BY and not to BZ.

This is the overall variation. Within one lot, the part to part variation is typically ± 10% versus the average value of the IMC gain

of that lot

MLX90367 Datasheet(PDF) 13 Page - Melexis Microelectronic Systems

MLX90367 Datasheet(HTML) 13 Page - Melexis Microelectronic Systems

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36

Datasheet Download

Link URL