Data brief

For further information contact your local STMicroelectronics sales office.

October 2009

Doc ID 15611 Rev 2

1/4

4

STEVAL-SPDC01V1

STEVAL-SPDC01V2

10 A DC-DC high density PoL convert module

demonstration boards based on the SPDC12L00010

Features

down to 0.6 V

shift

capability after soft-start

latched/not-latched mode

- 40 °C to 85 °C

Description

The boards are based on a single module

SPDC12L00010, high density 10 A DC-DC

converter, that implements a complete step-down

power supply.

A single LGA package includes ST switching

controller, power FETs, inductor and all the

support components and it is able to operate over

a wide input voltage range of 1.8 V to 14 V,

supporting an output range of 0.6 V to 5 V. High

level of integration and synchronous rectification

allows this module to deliver up to 10 A

continuous current at up to 93% efficiency,

without external heat sink or airflow. The device is

a complete standalone surface mount power

supply, that can be handled and assembled like a

standard integrated circuit. Moreover its low

profile design permits to be soldered onto the

back side of a printed circuit board, freeing up

valuable board space.

The SPDC12L00010 is self-protected against

overvoltage and short-circuit conditions.

A built-in adjustable soft-start and inhibit

guarantee correct functionality whatever the load

is.

Pre-bias start up capability is in place as well

Power Good output with programmable delay to

avoid false signals.

The device is packaged in a thermally enhanced,

compact (15 x 15 mm) and low profile (3 mm)

overmolded land grid array (LGA) package,

suitable for automated assembly by standard

surface-mount equipment.

The demonstration boards are an essential tool

for testing the module and it is Pb-Free and RoHS

compliant.

STEVAL-SPDC01V1

AM02123v1

STEVAL-SPDC01V2

www.st.com

Obsolete

Product(s)

- Obsolete

Product(s)