STM32F328C8 datasheet(13/109 Pages) STMICROELECTRONICS

13 / 109 page

DocID026351 Rev 3

13/109

STM32F328C8

Functional overview

3.2.3

Boot modes

At startup, BOOT0 pin and BOOT1 option bit are used to select one of three boot options:

•

Boot from user Flash

•

Boot from system memory

•

Boot from embedded SRAM

The boot loader is located in system memory. It is used to reprogram the Flash memory by

using USART1 (PA9/PA10), USART2 (PA2/PA3), I2C1 (PB6/PB7).

3.3

Cyclic redundancy check calculation unit (CRC)

The CRC (cyclic redundancy check) calculation unit is used to get a CRC code using a

configurable generator polynomial value and size.

Among other applications, CRC-based techniques are used to verify data transmission or

storage integrity. In the scope of the EN/IEC 60335-1 standard, they offer a means of

verifying the Flash memory integrity. The CRC calculation unit helps compute a signature of

the software during runtime, to be compared with a reference signature generated at

linktime and stored at a given memory location.

3.4

Power management

3.4.1

Power supply schemes

•

VSS, VDD = 1.8 V+/- 8%: external power supply for I/Os and core. It is provided

externally through VDD pins.

•

VSSA, VDDA = 1.65 to 3.6 V: external analog power supply for ADC, DACs, comparators

operational amplifiers, reset blocks, RCs and PLL. The minimum voltage to be applied

to VDDA differs from one analog peripherals to another. See the table below,

summarizing the VDDA ranges for analog peripherals. The VDDA voltage level must be

always greater or equal to the VDD voltage level and must be provided first.

•

VBAT= 1.65 to 3.6 V: power supply for RTC, external clock 32 kHz oscillator and

backup registers (through power switch which is guaranteed in the full range of VDD)

when VDD is not present.

3.4.2

Power supply supervision

The device power on reset is controlled through the external NPOR pin. The device remains

in reset state when NPOR pin is held low.To guarantee a proper power-on reset, the NPOR

Table 2. VDDA ranges for analog peripherals

Analog peripheral

Min VDDAsupply

Max VDDAsupply

ADC/COMP

1.8 V

3.6 V

DAC/OPAMP

2.4 V

3.6 V

STM32F328C8 Datasheet(PDF) 13 Page - STMicroelectronics

STM32F328C8 Datasheet(HTML) 13 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL