E

F

REV4_0516

*Images above is for illustration purposes only.

For more information, to find a distributor or to place an order,

visit www.qats.com or call 781.769.2800

Suggested Fan Details

Heat Sink Details

DIMENSIONS

PART #

DISTRIBUTOR

VOLTAGE

THERMAL RESISTANCE

30 x 30 x 6.9 mm

GM0503PEV1-8

DIGI-KEY

5V

1.21 °C/W

30 x 30 x 10 mm

GM1203PFV1-8

DIGI-KEY

12V

1.18 °C/W

ATS fanSINK™ with

maxiGRIP™ Attachment

ATS PART # ATS-61350K-C1-R0

Features & Benefits

optimum thermal performance independent of PCB lay-out

fan to heat sink assembly. 4-40 thread screws are supplied in 4 lengths

(1/2", 3/4", 7/8", 1"). Contact ATS for custom options available.

mechanical attachment system

Transportation Vibration; and MIL-STD-810 Shock Testing and

Unpackaged Drop Testing Standards

and 300 Series stainless steel spring clip- avoiding PCB through holes

centered on base

5 mm around the component is necessary to facilitate the installation/

removal of the maxiGRIP™. Please refer to the maxiGRIP™ Keep-Out

Guidelines and Installation/Removal Instructions for further details

FAN NOT INCLUDED

Fan type is specific to individual customer requirements and needs

to be independently sourced.

DIM A

DIM B

DIM C

DIM D

DIM E

DIM F INTERFACE MATERIAL

FINISH

ATTACHMENT

FAN

35 mm

35 mm 14.5 mm 19 x 19 mm 24 mm

24 mm

Chomerics T412

Blk Anodized

Customer Supplied

NOTES:

1)

Fan not included. Fan type is specific to individual customer requirements and needs to be

independently sourced.

2)

Dimension A and B refers to component size.

3)

Dimension C refers to the heat sink height from bottom of the base to the top of the fin field.

4)

Dimension D refers to the size of thermal interface material (TIM) applied to heat sink.

5)

Dimension E and F refers to hole spacing dimensions.

6)

Thermal data reference only. Actual performance may vary by application.

7)

ATS reserves the right to update or change its products without notice.

8)

9)

Contact ATS to learn about custom options available.