©

RFbeam Microwave GmbH | Schuppisstrasse 7 | CH-9016 St. Gallen | www.rfbeam.ch | K-LD2 | data sheet

09/2018 - Revision B | Page 19/20

Param. Default Min

Max

Name

Description

T00

00

00

01

Activate testing mode Activates the testing mode.

00: Testing mode disabled

01: Testing mode enabled

This parameter is not stored. After a reset or restart it is reset to the value 00.

T01

–

00

01

Force detection

output

Controls the detection output, if the testing mode T00 is enabled

00: force to low

01: force to high

T02

–

00

01

Force miscellaneous

output

Controls the miscellaneous output, if the testing mode T00 is enabled

00: force to low

01: force to high

Table 17: Class T 8-Bit testing parameters