| Electronic Components Datasheet Search |
|
ADP5072 Datasheet(PDF) 3 Page - Analog Devices |
|
|
|||||||||||||||||||||||||||||
ADP5072 Datasheet(HTML) 3 Page - Analog Devices |
|
3 / 24 page ![]() Data Sheet ADP5072 Rev. 0 | Page 3 of 24 SPECIFICATIONS PVIN = AVIN = 2.85 V to 5.5 V, positive output voltage (VPOS) = 15 V, negative output voltage (VNEG) = −15 V, fSW = 1200 kHz, TJ = −40°C to +125°C for minimum/maximum specifications, and TA = 25°C for typical specifications, unless otherwise noted. Table 2. Parameter Symbol Min Typ Max Unit Test Conditions/Comments INPUT SUPPLY VOLTAGE RANGE VIN 2.85 5.5 V PVIN, AVIN QUIESCENT CURRENT Operating Quiescent Current PVIN, AVIN (Total) IQ 3.5 4.0 mA No switching, EN1 = EN2 = high, PVIN = AVIN = 5 V Standby Current ISTNDBY 2.05 2.2 mA No switching, EN1 = EN2 = low, PVIN = AVIN = 5 V UVLO System UVLO Threshold AVIN Rising VUVLO_RISING 2.8 2.85 V Falling VUVLO_FALLING 2.5 2.55 V Hysteresis VHYS 0.25 V OSCILLATOR CIRCUIT Switching Frequency fSW 1.130 1.2 1.270 MHz SYNC = low 2.240 2.4 2.560 MHz SYNC = high (connect to PVIN) SYNC Input Input Clock Range fSYNC 1.0 2.6 MHz Input Clock Minimum On Pulse Width tSYNC_MIN_ON 100 ns Input Clock Minimum Off Pulse Width tSYNC_MIN_OFF 100 ns Input Clock High Logic VH (SYNC) 1.3 V Input Clock Low Logic VL (SYNC) 0.4 V PRECISION ENABLING (EN1, EN2) High Level Threshold VTH_H 1.125 1.15 1.175 V Low Level Threshold VTH_L 1.025 1.05 1.075 V Shutdown Mode VTH_S 0.4 V Internal circuitry disabled to achieve ISTNDBY Pull-Down Resistance REN 1.48 MΩ BOOST REGULATOR Adjustable Positive Output Voltage VPOS 35 V Feedback Voltage VFB1 0.8 V Feedback Voltage Accuracy −0.5 +0.5 % TJ = 25°C −1.5 +1.5 % TJ = −40°C to +125°C Feedback Bias Current IFB1 0.1 µA Overvoltage Protection Threshold VOV1 0.86 V At FB1 pin Load Regulation (∆VFB1/VFB1)/ΔILOAD1 0.0003 %/mA ILOAD11 = 5 mA to 150 mA Line Regulation (∆VFB1/VFB1)/ΔVPVIN 0.002 %/V VPVIN = 2.85 V to 5.5 V, ILOAD1 = 50 mA Error Amplifier (EA) Transconductance gM1 260 300 340 µA/V Power FET On Resistance RDS (ON) BOOST 175 mΩ Power FET Maximum Drain Source Voltage VDS (MAX) BOOST 39 V Current-Limit Threshold, Main Switch ILIM (BOOST) 1.0 1.1 1.3 A Minimum On Time 50 ns Minimum Off Time 25 ns |
|
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |