 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
UPD360 Datasheet(PDF) 91 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
UPD360 Datasheet(HTML) 91 Page - Microchip Technology |
|
|
91 / 221 page  2016-2017 Microchip Technology Inc. DS00002084C-page 91 UPD360 9.12.7 POWER INTERRUPT STATUS REGISTER (PWR_INT_STS) Address: 080Ah Size: 8 bits Bits Description Type Default 7 VBUS_MATCH_VLD Asserts after the VBUS debouncer is first enabled, via VBUS Comparator Control, and the first match becomes valid in VBUS Match Register (VBUS_- MATCH). R/WC 0b 6 VCONN Discharge Error (VCONN_DISCH_ERR) When set this bit indicates that a VCONN discharge error has been detected. This bit is only available in standalone DFP mode and is otherwise reserved. A discharge error is tracked when VCONN Discharge Control is set to 00b or 01b. A discharge error is asserted when VCONN fails to fall below VCONN Discharge Threshold (VCONN_DIS_THR) after a time greater than VCONN Discharge Time (VCONN_DIS_TIME) elapses. R/WC 0b 5 CC2 Back-Drive Error When set, indicates that back-drive has been detected on the CC2 pin. Note: The source of this input is a level and persists until the error condi- tion stops. R/WC 0b 4 VBUS Discharge Error When set, indicates that the an interval greater than defined in the VBUS Off Register (VBUS_OFF) has elapsed while attempting to discharge VBUS. Note: The source of this input is a pulse and does not persist after being cleared. R/WC 0b 3 VCONN2 FET Power The integrated VCONN2 FET is enabled and providing power. This bit only has usefulness for standalone operation or where VCONN is explicitly enabled by the host. Note: The source of this input is a level and persists until the VCONN is no longer present. R/WC 0b 2 VCONN1 FET Power The integrated VCONN1 FET is enabled and providing power. This bit only has usefulness for standalone operation or where VCONN is explicitly enabled by the host. Note: The source of this input is a level and persists until the VCONN is no longer present. R/WC 0b 1 CC1 Back-Drive Error When set indicates that back-drive has been detected on the CC1 pin. Note: The source of this input is a level and persists until the error condi- tion stops. R/WC 0b 0 VCONN Over-Current Error Indicates an over-current has been detected on the integrated VCONN FET. Note: The source of this input is a level and persists until the error condi- tion stops. R/WC 0b |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
British ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
