June 2005

ASM2P3805X

rev 0.2

3.3V CMOS Dual 1-To-5 Clock Driver

3 of 12

Notice: The information in this document is subject to change without notice.

Absolute Maximum Ratings

1

Symbol

Description

Max

Unit

Input Power Supply Voltage

-0.5 to +4.6

V

Input Voltage

-0.5 to +5.5

V

Output Voltage

V

Junction Temperature

150

° C

Storage Temperature

-65 to +165

° C

Static Discharge Voltage

(As per JEDEC STD 22- A114-B)

2

KV

Note: 1 These are stress ratings only and are not implied for functional use. Exposure to absolute maximum ratings for prolonged periods of time may affect

device reliability.

DC Electrical Characteristics over Operating Range

Following Conditions Apply Unless Otherwise Specified

Symbol

Parameter

Min

Max

Unit

Input HIGH Level

2

-

5.5

V

Input LOW Level

-0.5

-

0.8

V

Input HIGH Current

-

-

±1

Input LOW Current

-

-

±1

-

-

±1

High Impedance Output Current

(3-State Outputs Pins)

-

-

±1

µA

Clamp Diode Voltage

-

-0.7

-1.2

V

Output HIGH Current

3,4

-45

-74

-180

mA

Output LOW Current

3,4

50

90

200

mA

Short Circuit Current

3,4

-60

-135

-240

mA

2.4

5

3

-

2.4

5

3

-

Output HIGH Voltage

-

-

V

-

0.3

0.4

-

0.2

0.4

Output LOW Voltage

-

-

0.2

V

Notes:

1. For conditions shown as Max. or Min., use appropriate value specified under Electrical Characteristics for the applicable device type.

3. Not more than one output should be shorted at one time. Duration of the test should not exceed one second.

4. This parameter is guaranteed but not tested.