Plug-in Detector for Type-C Connector

PI5USB30216C

www.diodes.com

June 2022

Document Number DS44976 Rev 1-2

1

©Diodes Incorporated

PI5USB30216C

Features



Compatible to USB Type-C™ Specification 1.1



Backward Compatible to USB Type-C Specification 1.0



Supports Host mode/Device mode/Dual-role mode



Supports Dual-role modes with/without Try.SNK/Try.SRC

supported



Auto-Configure Ports Orientation through CC Detection



and Communication



Integrated High-precision Resistors and Current Sources

for CC pins



Provides support for Default current, 1.5A and 3A modes



Power Saving Mode



Output Indicator for Plug-in Detection



Wide Power Supply Range : 2.7V – 5.5V





Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)



Halogen and Antimony Free. “Green” Device (Note 3)



For automotive applications requiring specific change

control (i.e. parts qualified to AEC-Q100/101/104/200,

PPAP capable, and manufactured in IATF 16949 certified

facilities), please contact us or your local Diodes

representative.

https://www.diodes.com/quality/product-definitions/



Packaging (Pb-free & Green):



12- contact, STQFN(1.6mm x1.6mm)

Applications



Notebooks



Mobile Phones



Tablets



Docking Station

Description

The DIODES™ PI5USB30216C provides a cost-effective

solution for USB 3.0 Type-C connector applications.

PI5USB30216C detects the plug-in orientation of the cable at a

Type-C connector. It supports host mode, device mode and

dual role mode ports with automatic configuration based on

the voltage levels detected on CC pins. It is a fully-integrated

solution with ultra-low power dissipation. PI5USB30216C

enters power-saving mode when ENB pin is pulled up to VDD

through an internal resistor.

ADDR pin setting. It allows the system choose between pin

input pin determines the port setting in which host, device or

dual-role port can be selected. In host mode, the system can

monitor ID pin to know the connector status while default

current mode is set. Systems running in device mode can

monitor system VBUS for connector status as well as OUT1

and OUT2 pins for host’s charging profile capability. Enabling

communications

through

registers

read/write

in

PI5USB30216C. There is also flexibility to support Default,

1.5A and 3A current modes. An interrupt signal for indicating

the system any change in the Type-C connector while in

parallel the system can still monitor ID pin.

Notes:

1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS), 2011/65/EU (RoHS 2) & 2015/863/EU (RoHS 3) compliant.

2. See https://www.diodes.com/quality/lead-free/ for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-

free.

3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm

antimony compounds.

DIODES is a trademark of Diodes Incorporated in the United States and other countries.

The Diodes logo is a registered trademark of Diodes Incorporated in the United States and other countries.

USB Type-C is a registered trademark of USB Implementers Forum.