S320D datasheet(2/5 Pages) NPM

2 / 5 page

Note: The bending radius of

the motor cable should be

R36.6mm (wire diameter 4.6

* 6) as suggested by the wire

manufacturer. This radius

should be maintained. Use

supplied connector to attach

the proper high-flex cable as

required by your application.

Hall Effect Specs

The bending radius of the

sensor cable should be

R27.6mm (wire diameter 6.1

* 6) as suggested by the wire

manufacturer. This radius

should be maintained.

Wire Type

UL 758

Wire AWG

VCC

White/Red

GND

White/Black

Sensor 1

Orange/Red

Sensor 2

Orange/Black

Sensor 3

Gray/Red

Sensor Cable Specs

www.nipponpulse.com

Forcer Specs

S320D

S320T

S320Q

Forcer Length (A)

160mm (6.3in)

220mm (8.7in)

280mm (11.0in)

Forcer Width

60mm (2.36in)

Forcer Screw Pitch (P)

140mm (5.51in)

200mm (7.9in)

260mm (10.2in)

Forcer Weight

1.2kg (2.6lbs)

1.7kg (3.7lbs)

2.2kg (4.9lbs)

Gap

1.00mm (0.04in)

Screw

Tightening Torque

12.5 Nm

Total Length

Movable Length

Shaft Length

Forcer Screw Pitch

Stroke Length

dep

Motor Cable

Length

Support Length

Bending

Radius

Serial Number

Mounting Surface

Label

Gap

Bore

Reference End

Yellow Mark

Note: Cable length 300mm. The bending radius

of the motor cable should be 36.6mm (wire

diameter 5.3 * 6) as suggested by the wire

manufacturer. This radius should be maintained.

Use supplied connector to attach the proper

high-flex cable as required by your application.

L = See Shaft Length

L1 = Usable Stroke + A

L2 = See Support Length

A = See Forcer Length

P = See Forcer Screw Pitch

Tolerances are as follows:

Dimension (mm)

0 -

7 - 30

31 - 120

121 - 315

316 - 1000

1001 - 2000

2000 -

Tolerance (mm)

±0.1

±0.2

±0.3

±0.5

±0.8

±1.2

±1.5

Unless otherwise specified,

dimensions are in mm

S320D Datasheet(PDF) 2 Page - Nippon Pulse America, Inc.

S320D Datasheet(HTML) 2 Page - Nippon Pulse America, Inc.

Html Pages

1 2 3 4 5

Datasheet Download

Link URL