www.nipponpulse.com

For assistance in selecting the best motor for your application, contact Nippon Pulse

to speak with an applications engineer. 1-540-633-1677

Receptacle Housing

HLR-03V

Plug Housing

HLP-03V

Retainer

HLS-03V

Pin Contact

SSM-21T-P1.4

Socket Contact

SSF-21T-P1.4

Connector (Motor Cable)

To be installed by the user.

Forcer Spacing Distance

Tandem Forcer

Shaft Diameter (D) - 32mm ±0.2

Stroke (D/T/Q)

Support Length (L2)

Max. Bending

0~750

50mm

0.00mm

751~1000

70mm

0.30mm

1001~1500

70mm

0.70mm

1501~max

100mm

0.70mm

Support and Bending

Total Length (L)=Stroke (S)+Forcer Length (A)+(Support Length (L2)x2)

Spec

S320T

S320Q

Forcer Spacing Distance

20mm

Pole (N/S) Distance

60mm

Forcer Length

220mm

280mm

Flip Forcers

No

Yes

Forcer Spacing Distance

Tandem S320D forcers are possible, but are

equivalent to one (1) S320Q forcer and thus are

not listed above.

THM Option

Thermocouple

Thermal sensor

Thermocouple K type (marked each phase name)

Attached to the surface of inside of coil

Length 3000mm

Note: Metric units guaranteed. Imperial (United States customary) units are calculated.

Not all motors on this datasheet have received a CE Declaration of Conformity. Only the standard S320D, S320T and S320Q motors have been certified to CE

standards. The motors and motor options with the following designations have not received a CE Declaration of Conformity, and as such are designated FGA:

S320D-1S, S320T-1S, S320Q-2S, S320Q-1S, any S320 motor with Hall Effects, Thermistor or Thermocouple options.

Ground Wire

Wire Type

UL 1330

Wire AWG

24

U Phase

Red

V Phase

White

W Phase

Black

FGA/CE Option - Lead Wire

300mm lead wire bare leads. The

bending radius of the motor cable

should be 18.96mm as suggested

by the wire manufacturer. FG type

with insulating sheet between coils

and case. Meets all requirements of

EN60034-1 (1998).

Additional stroke lengths are available (up to 2310mm for S320D, 2250mm for S320T, and 2190mm for S320Q). Contact Nippon Pulse for more information.

Shaft Length (L), continued

Shaft Mass, continued

1700

2240mm (88.2in)

2300mm (90.6in)

2360mm (92.9in)

1750

2350mm (92.5in)

2410mm (94.9in)

2470mm (97.2in)

1800

2460mm (96.9in)

2520mm (99.2in)

2580mm (101.6in)

1850

2570mm (101.2in)

2630mm (103.5in)

2690mm (105.9in)

1900

2680mm (105.5in)

2740mm (107.9in)

2800mm (110.2in)

1950

2790mm (109.8in)

2850mm (112.2in)

2910mm (114.6in)

2000

2900mm (114.2in)

2960mm (116.5in)

3020mm (118.9in)

1700

11.1kg (24.4lb)

11.4kg (25.1lb)

11.7kg (25.9lb)

1750

11.3kg (25lb)

11.7kg (25.7lb)

12kg (26.5lb)

1800

11.6kg (25.6lb)

12kg (26.4lb)

12.3kg (27.1lb)

1850

11.9kg (26.2lb)

12.2kg (27lb)

12.6kg (27.7lb)

1900

12.2kg (26.9lb)

12.5kg (27.6lb)

12.9kg (28.3lb)

1950

12.5kg (27.5lb)

12.8kg (28.2lb)

13.1kg (29lb)

2000

12.7kg (28.1lb)

13.1kg (28.8lb)

13.4kg (29.6lb)