Page 4

www.sensata.com

Copyright © 2022 Sensata Technologies, Inc.

STANDARDS OF COMPLIANCE

Shock and Vibration (Applies to all part numbers)

Vibration Resistance according to IEC 60068-2-6: 0.35mm and 0.75mm Amplitude over 10-55 Hz

Shock Resistance according to IEC 60068-2-27: 15g/11ms

EMC (Applies to all part numbers)

IEC 61000-4-2: Electrostatic Discharge- Level 3

IEC 61000-4-4: Electrically Fast Transients- Level 3

IEC 61000-4-5: Electrical Surges- Level 3

ANSI / ISA 12.12.01-2013

Nonincendive Electrical Equipment for Use in Class I and II, Division 2 and Class III, Division 1 and 2 Hazardous (classified) locations

This equipment is open-type device and is meant to be installed in an enclosure suitable for the enviroment such that the equipment is only accesible

with the use of a tool suitable for use in Class 1, Division 2, Group A,B,C and Hazardous locations, or Nonhazardous locations only

WARNING-Explosion Hazard- Do not disconnect equipment while the circuit is live or unless the area is known to be free of ignitable concentrations

WARNING-Explosion Hazard- Substitution of any component may impair suitability for Class I, Division 2

DR10D10

DR10D24

Single and multiple units (for DRxxx03)

Single unit, distance to adjacent components ≥ 11 mm for DRxxx06,

DR10D10 and ≥ 18 mm for DRxxx12, DR10D24

Multiple units, no minimum spacing between components

0

4

8

12

16

20

24